Status

Page Status

Owner

Stakeholders

Purpose

The purpose of this document is to define the conversion approach to upload Materials - Class Type 001 into S/4 HANA as part of the Material Data Migration.

Link to MDS: DD-FUN-050 Master Data Standard_2017-Material master - Class Type 001

Conversion Scope

The scope of this document covers the approach for converting active Class data linked to Class Type 001 from Legacy Source Systems into S/4HANA following the Material Master Data Design Standard.

Click here to go to the Conversion Spec for 2019 to see the full set of relevancy rules.

List of source systems and approximate number of records

The Business and S2P Functional Team have decided not to use legacy Classes, but instead to create 4 new Classes linked to Class Type 001. (It is possible that this number may change in the future.)

The 4 new Classes are documented in the MDS on the "Governance" sheet in the "Field Governance Rules" section, in rule #1, Class, as part of the Rule Description.

Click here to go to the Conversion Spec for 2019 to see the full set of relevancy rules for Materials.

List of source systems and approximate number of records

Source	Scope	Source Approx No. of Records	Target System	Target Approx No. of Records
PF2 & WP2	4 new To-Be Classes linked to Class Type 001 has been defined by the Business and the S2P Functional Team. The new Classes will be captured in a DCT

SourceScope

Source Approx No. of Records

Target SystemTarget Approx

No. of Records

PF2,WP2Scope is Classes that fall under CLASS TYPE 001, are linked to Material records that have been identified as part of Basic Data and have descriptions in languages that are in the Core or Additional list

.

Service Master records that will become Materials in the target are out of scope. See the mail from Simran. Service Master Data Used in 2017 CLASS TYPE 001 in S4H.pdf

WP2: 22,838 (3,001 **)

PF2: 5,167 (6 **)

** Linked to relevant materials for info purposes
** No Classes are linked to Service Materials

S4H

28,005 (3,007 **)

** Linked to relevant

materials

materials for info purposes
** No Classes are linked to Service Materials


DCT	Linking Classes to Characteristics (2018 Materials - Characteristics of Class Type 001)	Classes: 4 Characteristics: 43	S4H	53

Jira Task to Jira Task to track the Classes that will be added to CLASS TYPE 001:

Jira

server	Syensqo's Jira
serverId	d8efc1ef-48bd-3b4e-8714-ad827f4f059b
key	PDM-770

Configuration Document containing the above classes: <To Be Add>

Profiling

Legacy System	Total Relevant Materials	Relevant Materials assigned to Classes
PF2	104,484	4,224
WP2	72,378	25,866

Top 30 Classes by Legacy system

Legacy System	CLASS	Material Count
PF2	Z_MAT_PL_ARCH	3,202
	SPARE_PARTS_TC	989
	Z_ORTEMS	6
	DANGEROUS_GOOD	7
	Z_SAD_MM	7
	Z68-42169	1
WP2	Z_CM_MAT	6,043
	LIP0020148	3,447
	M001	2,898
	Z_MAT_PL_ARCH	2,088
	MATERIAL_SEGMENTS	935
	LIP0034040	842
	Z_MAT_ADDITIONAL	456
	Z_MAT_CRIT	418
	LIP0008485	343
	CRIT_IND	333
	LIP0007716	226
	LIP0031355	210
	LIP0032812	120
	LIP0034030	94
	LIP0032484	82
	LIP0008484	81
	LIP0032488	78
	LIP0031345	69
	LIP0034571	69
	LIP0008411	68
	LIP0034568	61
	LIP0008367	60
	LIP0034050	60
	M002_H_05_AH	57
	LIP0008258	54
	LIP0034000	54
	M002_A_08_AT	52
	LIP0031324	51
	LIP0020168	50
	LIP0008394	46

Predecessor Objects

Material Master - Basic View (2019) → Material (Characteristics of CLASS TYPE -001) (2018) → Material - Class Type 001 (2017).
Material (Characteristics of CLASS TYPE -001) (2018) ↗

Additional Information

Multi-language Requirement

Multi language is supported for Materials - Class Type 001. Login via a different language will show the description displayed in the logon language if the language key is maintained.

The following languages are allowed:

Core languages: EN - English, FR - French, IT - Italian and ZH - Mandarin.
Additional languages: PT - Portuguese, DE - German and ES - Spanish.

It is now mandatory that a Description is required for each Core and Additional language.

Document Management

Not Applicable

Legal Requirement

Not Applicable

Special Requirements

Not Applicable

Target Design

The technical design of the target for this conversion approach.

Table	Field	Field Description	Data Type	Length	Requirement
KLAH	CLINT	Internal Class Number	NUMC	10	Required
KLAH	KLART	Class Type	CHAR	3	Required
KLAH	CLASS	Class	CHAR	18	Required
KLAH	STATU	Status	CHAR	1	System
~~KLAH~~	~~LOCLA~~	~~Local class~~	~~CHAR~~	1Conditional	~~Not Required~~
KLAH	VONDT	Valid from	DATS	8	System
KLAH	BISDT	Valid to	DATS	8	System
KLAH	PRAUS	Same classification	CHAR	1	System
KLAH	ANAME	Created By	CHAR	12	System
KLAH	ADATU	Created On	DATS	8	System
KLAH	ANZUO	No of Assignments	CHAR	1	System
SWOR	CLINT	Internal Class Number	NUMC	10	Required
SWOR	SPRAS	Language Key	LANG	1	Required
SWOR	KLPOS	Item Number	NUMC	2	Required
SWOR	KSCHL	Class Description	CHAR	40	Required
SWOR	KSCHG	Keyword (Upper Case for Matchcode)	CHAR	40	Required

Data Cleansing

Table

ID

Field

CriticalityError Message/Report DescriptionRuleOutputSource SystemSyniti Report Required1MediumNo Class Description in Allowed LanguagesThe following language are allowed as being either core, or additional: DE, EN, ES, FR, IT, PT, ZH.KLAH-KLART and KLAH-CLASS

PF2 & WP2

YES

Field Description	Data Type	Length	Requirement
KSML	CLINT	Internal Class Number	NUMC	10	Required
KSML	POSNR	Item Number	NUMC	3	Required
KSML	IMERK	Internal Characteristic	NUMC	10	Required
KSML	KLART	Class Type	CHAR	3	Required

Data Cleansing

ID	Criticality	Error Message/Report Description	Rule	Output	Source System	Syniti Report Required
		Not Applicable

Conversion Process

The high-level process for Classes that will be migrated are represented by the diagram below:

Image Added

The high level process for Classes that will be captured in a DCT are represented by the diagram below:

Image Added

Field Governance Rules
These governance rules apply to the individual fields within the data record.
Rule #	Field Label	Rule Description	Validation Method	Conditional Logic	Cleansing Rule (Also see Data Cleansing section above)
1	KLAH-KLART	Only records with CLASS TYPE 001 are being migrated.	Upfront Automated	KLART = '001'
3	SWOR-SPRAS	The following language are allowed

Conversion Process

The high-level process is represented by the diagram below:

Image Removed

Field Governance Rules
These governance rules apply to the individual fields within the data record.
Rule #	Field Label	Rule Description	Validation Method	Conditional Logic	Cleansing Rule (Also see Data Cleansing section above)
1	KLAH-KLART	Only records with CLASS TYPE 001 are being migrated.	Upfront Automated	KLART = '001'	2	KLAH-CLINT	Only records where the material is relevant.	Upfront Automated	KLAH-CLINT = KSSK-CLINT and KSSK-OBJEC = MARA-MATRN
3	SWOR-SPRAS	The following language are allowed: DE, EN, ES, FR, IT, PT, ZH..	Upfront Automated		No Class Description in Allowed Languages

Data Privacy and Sensitivity

Not Applicable

Extraction

Class data for CLASS TYPE 001 that are linked to Material records that have been identified as part of Basic Data will be extracted. No are identified by data entered into a DCT and marked in the DCT for migration. (The DCT also contains data for new Classes that don't exist in the Source Systems.) No data for Service Master records that will become Materials in the target will be extracted.

Extraction Run Sheet

Req #	Requirement Description	Team Responsible
1	Extract data from source system based on relevancy rulesrecords in the DCT that are marked for migration.	Syniti

Selection Screen

Selection Ref Screen	Parameter Name	Selection Type	Requirement	Value to be entered/set
Not Applicable

Data Collection Template (DCT)

Not Applicable

Extraction Dependencies

Item #Step DescriptionTeam Responsible1

Materials in scope to be loaded as Material Master Basic Data must be identified before the extraction of Class data, so that we can limit the extraction to this sub-set of data.

Cutover

DCT Rules for Class:

Field	Field Description	Rule
KLART	Class Type	Read-only field. Default to '001'.
CLASS	Class
STATU	Status	Default to '1'.
~~LOCLA~~	~~Local class~~	~~Default to Blank~~. MDS changed after CS completed. No longer required.
VONDT	Valid from	Default to Today.
BISDT	Valid to	Default to '99991231'.
PRAUS	Same classification	Default to Blank.
SPRAS	Language Key	Default to 'EN'. All Classes must have a description in at least 'EN'. Allow the Description to be captured in multiple languages, with the following languages allowed: DE, EN, ES, FR, IT, PT, ZH. Convert to internal code.
~~KLPOS~~	~~Item Number~~	~~Read-only field. Counter~~. Logic moved to Transformation Rules.
KSCHL	Class Description	Ensure no duplicate (With other Classes within Class Type 001) and language key. Ensure populated with Description as per specified Language. Approach if the description is more than 40 characters: Abbreviate to required length (40 Chars). Ensure that it does not include any of the below characters: ; Semi-colon : Colon :: Double Colon ? Question Mark / Forward Slash @ At sign & Ampersand = Equal Sign + Plus Sign $ Dollar Sign % Percent \| Vertical Bar [] Left or Right Square Bracket " Double Quotes
~~KSCHG~~	~~Keyword (Upper Case for Matchcode)~~	~~Read-only field. Upper case version of KSCHL~~. Logic moved to Transformation Rules.

DCT Rules for linking Classes to Characteristics (DCT.KSML)**:

Field	Field Description	Rule	Tool Tip	zComment	zDelete
CLASS	Class Name	Mandatory. Use drop-down based on S4H.KLAH-CLASS.	Name used to uniquely identify a class within a class type.
ATNAM	Characteristic Name	Mandatory. Use drop-down based on S4H.CABN-ATNAM.	Unique technical name identifying the characteristic (e.g. LENGTH, COLOR).

** Load File: 2023-Class to Characteristic Load File.xlsx

Extraction Dependencies

Item #	Step Description	Team Responsible
1	The list of Classes will be provided by the Functional Team in the Configuration Document based on the To-Be design.	S2P Functional Team

Transformation

The Target fields are mapped to the applicable Legacy field that will be its source, this is a 3-way activity involving the Business, Functional team and Data team. This identifies the transformation activity required to allow Syniti Migrate to make the data Target ready:

Prepare target-ready data in the structure and format that is required for loading via prescribed Load Tool. This step also produces the load data ready for business to perform Pre-load Data Validation

Transformation Run Sheet

Item #	Step Description	Team Responsible
1	Verify that data is extracted from the DCT.	Syniti / S2P Data Team
2	Verify that data is extracted from both source systems.	Syniti / S2P Data Team
3	Transformation jobs are ready for execution.	Syniti
4	Review and Validate Error and Preload Reports	Syniti
5	Generate Load Files	Syniti

Transformation Rules

Transformation Rules for Classes:

Rule #	Source system	Source Table	Source Field	Source Description	Target System	Target Table	Target Field	Target Description	Transformation Logic
1	DCT	KLAH	CLINT	Internal Class Number	S4H	KLAH	CLINT	Internal Class Number	System generated
2	DCT	KLAH	KLART	Class Type	S4H	KLAH	KLART	Class Type	Copy As-Is (will always be '001')
3	DCT	KLAH	CLASS	Class	S4H	KLAH	CLASS	Class	Copy As-Is
4	DCT	KLAH	STATU	Status	S4H	KLAH	STATU	Status	Copy As-Is
5	~~DCT~~	~~KLAH~~	~~LOCLA~~	~~Local class~~	~~S4H~~	~~KLAH~~	~~LOCLA~~	~~Local class~~	~~Copy As-Is~~. MDS changed after CS completed. No longer required.
6	DCT	KLAH	VONDT	Valid from	S4H	KLAH	VONDT	Valid from	Copy As-Is
7	DCT	KLAH	BISDT	Valid to	S4H	KLAH	BISDT	Valid to	Copy As-Is
8	DCT	KLAH	PRAUS	Same classification	S4H	KLAH	PRAUS	Same classification	Copy As-Is
9	DCT	KLAH	ANAME	Created By	S4H	KLAH	ANAME	Created By	System generated
10	DCT	KLAH	ADATU	Created On	S4H	KLAH	ADATU	Created On	System generated
11	DCT	KLAH	ANZUO	No of Assignments	S4H	KLAH	ANZUO	No of Assignments	System generated
12	DCT	SWOR	CLINT	Internal Class Number	S4H	SWOR	CLINT	Internal Class Number	Copy from target KLAH-CLINT that was generated in Rule 1
13	DCT	SWOR	SPRAS	Language Key	S4H	SWOR	SPRAS	Language Key	Copy As-Is. There must be a description for each of the Core and Additional languages. If a language is missing take if from English.
14					S4H	SWOR	KLPOS	Item Number	This is a counter and it increments by 1 for each Description in a different language for the same S4H.KLAH-CLINT.
15	DCT	SWOR	KSCHL	Class Description	S4H	SWOR	KSCHL	Class Description	Copy As-Is. There must be a description for each of the Core and Additional languages. If a language is missing take if from English.
16					S4H	SWOR	KSCHG	Keyword (Upper Case for Matchcode)	Upper case version of DCT.SWOR-KSCHL

Transformation Rules for linking Classes to Characteristics:

Rule #	Source system	Source Table	Source Field	Source Description	Target System	Target Table	Target Field	Target Description	Transformation Logic
1	DCT	KSML	CLASS	Class Name	S4H	KSML	CLINT	Internal Class Number	Copy S4H.KLAH-CLINT WHERE DCT.KSML-CLASS = S4H.KLAH-CLASS
2					S4H	KSML	POSNR	Item Number	Integer counter starting at 1 and incrementing by 1 for each CLINT. When CLINT changes it starts from 1 again.
3	DCT	KSML	ATNAM	Characteristic Name	S4H	KSML	IMERK	Internal Characteristic	Copy S4H.CABN-ATINN WHERE DCT.KSML-ATNAM = S4H.CABN-ATNAM
4					S4H	KSML	KLART	Class Type	Default to "001"

Transformation

The Target fields are mapped to the applicable Legacy field that will be its source, this is a 3-way activity involving the Business, Functional team and Data team. This identifies the transformation activity required to allow Syniti Migrate to make the data Target ready:

Perform value mapping and data transformation rules.
1. Legacy values are mapped to the to-be values (this could include a default value)
2. Values are transformed according to the rules defined in
Prepare target-ready data in the structure and format that is required for loading via prescribed Load Tool. This step also produces the load data ready for business to perform Pre-load Data Validation

Transformation Run Sheet

Item #Step DescriptionTeam Responsible

1

Verify that data is extracted from both source systems.

Syniti / S2P Data Team

2

Transformation jobs are ready for execution.

Syniti

3

Review and Validate Error and Preload Reports

Syniti

4

Generate Load Files

Syniti

Transformation Rules

Rule #Source systemSource TableSource FieldSource DescriptionTarget SystemTarget TableTarget FieldTarget DescriptionTransformation Logic1PF2 & WP2KLAHCLINTInternal Class NumberS4HKLAHCLINTInternal Class NumberSystem generated2PF2 & WP2KLAHKLARTClass TypeS4HKLAHKLARTClass TypeCopy As-Is (will always be '001')3PF2 & WP2KLAHCLASSClassS4HKLAHCLASSClassCopy As-Is4PF2 & WP2KLAHSTATUStatusS4HKLAHSTATUStatusCopy As-Is5PF2 & WP2KLAHLOCLALocal classS4HKLAHLOCLALocal classCopy As-Is6PF2 & WP2KLAHVONDTValid fromS4HKLAHVONDTValid fromCopy As-Is7PF2 & WP2KLAHBISDTValid toS4HKLAHBISDTValid toCopy As-Is8PF2 & WP2KLAHPRAUSSame classificationS4HKLAHPRAUSSame classificationCopy As-Is9PF2 & WP2KLAHANAMECreated ByS4HKLAHANAMECreated BySystem generated10PF2 & WP2KLAHADATUCreated OnS4HKLAHADATUCreated OnSystem generated11PF2 & WP2KLAHANZUONo of AssignmentsS4HKLAHANZUONo of AssignmentsSystem generated12PF2 & WP2SWORCLINTInternal Class NumberS4HSWORCLINTInternal Class NumberMap from legacy KLAH-CLINT to KLAH-CLINT generated in Rule 113PF2 & WP2SWORSPRASLanguage KeyS4HSWORSPRASLanguage KeyCopy As-Is14PF2 & WP2SWORKLPOSItem NumberS4HSWORKLPOSItem NumberCopy As-Is15PF2 & WP2SWORKSCHLClass DescriptionS4HSWORKSCHLClass DescriptionCopy As-Is16PF2 & WP2SWORKSCHGKeyword (Upper Case for Matchcode)S4HSWORKSCHGKeyword (Upper Case for Matchcode)Copy As-Is

Joining Material to Class

KSSK-OBJEK = MARA-MATNR.
KLAH-CLINT = KSSK-CLINT & KLAH-KLART = '001'.

The following image shows the various joins for characteristics:

Image Removed

Transformation Mapping

Mapping Table Name	Mapping Table Description

LinkMaterialXREFMM Config Values - Material MasterCLINTXREFMM Config Values - Classes for 001

	Link
Not Applicable

Transformation Dependencies

List the steps that need to occur before transformation can commence

Syniti & S2P Data Team

Item #	Step Description	Team Responsible
1	Data has been extracted from sources systems	Syniti
2	Deduplication is completed		3	Configuration should be completed - (Config documents should be complete)	Syniti & S2P Data Functional Team
43	Value mapping and XREF tables are ready	Syniti & S2P Data Team
4	Characteristics for Class Type 001 have been loaded into S4H	Syniti

Pre-Load Validation

Project Team

Completeness

Task	Action
Verify Record Count	The number of records presented after relevancy checks and validation needs to be correct compared to the staged data in between the DCT and the preload tables in Syniti Migrate.
Completeness check	All fields required as per mapping template rules must be completed. Validity Syniti Migrate standard validity reports checking each field in Syniti must be built.

Accuracy

Task	Action
Conversion Accuracy	Data team to verify Verify that the data staged in the preload tables are correct in terms of the mapping rules. This will be done via Syniti DSP Migrate standard reports.

Business

Completeness

Task	Action
Count and Completeness check	All fields required as per mapping template rules must be completed. Validity Syniti Migrate standard validity reports checking each field in ADMM must be built to help check.

Accuracy

Task	Action
Conversion Accuracy	Business team to verify that the data staged in the preload tables are correct in terms of the mapping rules. This will be done via Syniti ADMM Migrate reports/SAP reports.

Load

The load process includes:

Execute the automated data load into target system using the appropriate load tool.
Once the data is loaded to the target system, it will be extracted and prepared for Post Load Data Validation.

Load Run Sheet

Item #	Step Description	Team Responsible
1	Verify data extracted	Data Specialist/Functional - S2P
2	Verify data combined from both source systems	Data Specialist/Functional - S2P
3	Verify Material XREF is ready (based on load of 2019 Material Master - Basic View)	Data Specialist/Functional - S2P	4	Stage data for transformations	Syniti
54	Run transforms	Syniti
85	Execute pre-load report	Syniti
96	Validate preload report - release	Data Specialist/Functional - S2P
107	Prepare and simulate	Syniti
118	Pre-load verification and approval to load	Functional/Data Owner - S2P
129	Load to S4	Syniti
1310	Complete Jira steps, Volumes and Timings	All - where applicable
1411	Execute post-load report	Syniti
1512	Post-load report verification/validation	Data Specialist/Functional/Data Owner - S2P
1613	Object load completion approval	Data Owner - S2P

Load Phase and Dependencies

Configuration

Item #

Configuration Item

1

TCLA-Class Types

2

TCLG-Class Groups

3

TCLU-Class Status

Not Applicable

Conversion Objects

Object #	Preceding Object Conversion Approach
1	Material Master - Basic View (2019(Characteristics of CLASS TYPE -001) (2018)

Error Handling

Fix incorrect data

Error Type	Error Description	Action Taken	Data	Classes not linked to a Target Material	Action Taken
Data	Incorrect Language	Fix incorrect data
Data	Duplicates	Fix incorrect data
Load	Authorization errors	Apply for the applicable authorization permission and retry
Load	Technical load failures - If using MC - Simulation errors, etc	Investigate error and rectify. Retry simulation and/or load

Post-Load Validation

Project Team

Post-Load Steps

Step Description	Team Responsible
Execute post-load report	Syniti
Post-load report verification/validation	Data Specialist/Functional/Data Owner - S2P
Object load completion approval	Data Owner - S2P

Completeness

Task	Action
Verify count	The number of records presented in the post-load needs to be compared to the preload – Syniti report
Field by field check	Compare source data staged in the preload tables to target data in the load tables.

Accuracy

Task	Action
Verify Logs	Check if there is data that failed to load and perform the necessary actions (e.g. register as post load issue or attempt to load the record again, etc.).

Business

Completeness

Task	Action
Verify Count	The number of records presented in the preload needs to be compared to the post-load Syniti report.
Missing data	Check missing data which was supposed to be loaded.
Reconciliation	Participate in Post-load walkthroughs.

Accuracy

Task	Action
Conversion Accuracy	Business team to verify Verify that the data staged in the preload tables are correct in terms of the mapping rules. This will be done via Syniti/SAP in S/4 HANA was loaded correctly via Syniti Migrate post-load reports.

Key Assumptions

Master Data Standard is up to date as on the date of documenting this conversion approach and data load.
Materials - Class Type 001 is 001 is in scope based on data design and any exception requested by business.

Change log

Change History

limit	10

Workflow history

Workflow Report

parent	@self
hideheader	true
type	approvals

Dec 03, 2025	Actor	Type	Activity	Version
Approved	JAIN-ext, Gaurav	State	changed state to Approved at 8:15 am	v47
Edited following Approval	JAIN-ext, Gaurav	State	gave Minor change approval at 8:15 am
Dec 01, 2025
	CLARKE-ext, Steve	Comment	commented 5:45 pm There is no link. I asked Simran about this for 2018. She responded: there is no config document for this as this is master data
		Comment	commented 5:42 pm We are not using any mappings
		Comment	commented 5:41 pm This is if there are no descriptions in the 7 allowed languages.
		Edit	updated the page at 5:36 pm
		Comment	commented 5:29 pm This is already documented above in Multi-language Requirement. I will update it to indicate that it is now mandatory that a description is required for each core and additional language. I have updated the Transformation Rules for the Descriptions to include: "There must be a description for each of the Core and Additional languages. If a language is missing take if from English." Syniti are aware that SPRAS is a key.
	MADHOK-ext, Jasleen	Comment	commented 4:50 pm CLARKE-ext, Steve Configuration table link is required.
		Comment	commented 4:49 pm CLARKE-ext, Steve What Transformation tables are required?
		Comment	commented 4:44 pm CLARKE-ext, Steve what is this rule?
		Comment	commented 4:44 pm CLARKE-ext, Steve Please add Class must have 1 Description for each language, which also serves as the primary keyword. The required languages are English, French, Italian, Mandarin, Brazilian Portuguese, German and Spanish.
	CLARKE-ext, Steve	Edit	updated the page at 3:51 pm

Workflow history

Space shortcuts

Page tree

Page History

Versions Compared

Old Version 24

New Version Current

Key

Purpose

Conversion Scope

Profiling

Predecessor Objects

Additional Information

Multi-language Requirement

Document Management

Legal Requirement

Special Requirements

Target Design

Data Cleansing

Conversion Process

Conversion Process

Data Privacy and Sensitivity

Extraction

Extraction Run Sheet

Selection Screen

Data Collection Template (DCT)

Extraction Dependencies

Extraction Dependencies

Transformation

Transformation Run Sheet

Transformation

Transformation Run Sheet

Joining Material to Class

Transformation Mapping

Transformation Dependencies

Pre-Load Validation

Project Team

Completeness

Accuracy

Business

Completeness

Accuracy

Load

Load Run Sheet

Configuration

Conversion Objects

Error Handling

Post-Load Validation

Project Team

Post-Load Steps

Completeness

Accuracy

Business

Completeness

Accuracy

Key Assumptions

See also

Change log

Workflow history