• Name the Operating procedure: OP.xxx - description of the operating procedure
  • verify the appropriate Scope(s): PF1, WP1, Worldwide (remove the icon(s) not appropriated)
  • verify the appropriate Frequency: , , , , (remove the icon(s) not appropriated)
  • fill the associated Process Name from the Costing - Process Space: copy the url of the costing process page from the list of Process Workflow and Operations
  • fill the Responsibility Area from the Costing - Process Space: copy the url of the costing responsibility page from
the list of Costing Responsibility Areas
or from the list of Costing Responsibility Customers 
  • fill the Previous Operating Procedure from the Costing - Process Space
  • replace the SAP Transaction tag op_xxx by the appropriate op tags
  • fill the Next Operating Procedure from the Costing - Process Space
  • verify the appropriate tags to the page (remove the tags not appropriated):
    • add the OP number (op_xxx),
    • Scope (wp1, pf1, ww),
    • Frequency ( yearly, quarterly, monthly, weekly, on-demand , ...),
    • Responsibility Area (maintain_assessment_cycles, maintain_costing_master_data, manage_activity_type_price, monitor_consitency_monthly_cost_calculation, perform_costing_monthly_closing, supervise_product_costing, requester, ...),
    • costing process (assessment_cycle_maintenance, product_costing, monthly_closing, master_data_management ...)
  • Create the corresponding Operating Procedure (OP.xxx) in the the Costing - Process Space
    Create Operating Procedure (Costing process)

  • Remove this warning box when all items are done

Prerequisite

PF1 WP1 Worldwide

  This procedure describes the check between the subledger Module Material Management and FI-GL.

 

     
process name 

Area: Responsibility Area

The check has to be done by SBS RtR Service Center.

previous Operation(s):

Rules & Glossary: Costing - Rules Costing - Glossary Costing - SAP Operations

Additional information   

The check is performed on a monthly basis, on D+2 after all postings are performed (when MMRV transaction is already close) and before the BFC stocks upload for both systems.

 

 

Guideline

 

 

·         For PF1 system or ERP Solvay:


Once the report is displayed, check the values in column variance. If the amount is different to zero column this means that there is a difference between FI and MM. This check should be done for all stock accounts (check page down until the end or the report).

 In this example we have a difference in account 2000010000 of  99.331, 00 €.

 

 

 

 

 

 

 

 

 

 

  • For WP1 system or RCS:









If you have variance go to Step 3


 

When the previous check returns a difference in column “variance”, meaning you have a difference between FI and MM modules, enter in the report S_ALR_87012332 (PF1) or report S_ALR_87012277 (WP1) in order to identify the posting that is causing the difference.
(REMARK: If no difference was returned on the previous check, you can skip this step and go directly to the step regarding to Negative Stocks, described in this document)



Go to  report S_ALR_87012332 and use the following parameters:
·         Select the variant 3S-FIMMCHECK;
·         Select the account(s) that is generating the difference;

 

·         The company code and execute.


 

 

 

 

 

Considering the previous example, the postings generating difference is from 2007:

 

 

 

 

 

 

 

Once the posting that is generating the difference is identified, report to regional office (in this case there were manual corrections done in FI but not in MM, therefore generating a difference between the two modules).

 

Go to report S_ALR_87012277 and select the Variant :

  • SBS_STOCKS

 

Then enter the company code.





































How to check the total amount of stocks?

 

Check if cumulative amount in the Stock accounts is the same as in Stock Module.

·         S_ALR_87012277





·         MB5L




Compare if the total amount in the accounts match with the total amount in Stocks.

 

 

Inform the regional office responsible that the check was done and include your analysis.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

In PF1, how to check negative stocks

Enter the following selections:

 

Company Code : XXXX

 

General Ledger Account : from 200000000 to 2199999999

 

Select : Balance  Previous periodu

 

Scope of List:  Check “Negative Stock”

 

Layout : /BESTÄNDE (PF1)


And press Execute  



 


After press execute you will receive the following warning message:

 and then press enter to continue.

  • If you receive the message "There are no negative stocks" , it means that everything is ok.

 

                                                          

 

  • If there are negative stocks the flowing screen will be displayed and you will find the inventory accounts with negative stock. 


 

 

 

 


  •  For each account that appears with values (highlighted in green or in red), double click and check the materials with negative stocks (marked in red):

 

 

 

 

 

 

 




  • You may also consider cross reference the material with negative stock with the following transaction MR51.




    This transaction allows a better overview of the material posting documents, filtering the period and material(s) in error.

 

 

 

 

You will receive a warning message:

 and you just press enter to continue. 

 

 

 

 

 

 

 

 

 

 

 

In the example we can see there is an unmatched document that is probably missing a movement. This information can be shared when communicating errors.

 

 

 

 

 

 

 

 

 

 

 

Example of a negative stock in MB5L:

 

 

 

 

 

When the previous check returns a difference in column “variance”, meaning you have a difference between FI and MM modules, enter in the report S_ALR_87012332 in order to identify the posting that is causing the difference and use the following parameters:
(REMARK: If no difference was returned on the previous check, you can skip this step and go directly to the step regarding to Negative Stocks, described in this document)
 
·         Select the variant 3S-FIMMCHECK (PF1);
·         Select the account(s) that is generating the difference;
·         The company code and execute.

 

 For PF1, what to do in the case of existing negative stocks or in case of errors?

 

Inform the regional office responsible and provide one explanation/analysis including:

 

  • Company Code
  • Account Code
  • Amount in FI-MM
  • Amount in FI-GL
  • Difference