1 OBJECTIVE AND SCOPE

1.1. Objective of this Procedure

This document's objective is to provide a guide to managing Material master data ZVER and ZUNB materials.

This document is a complement to Standard Operating Procedure "Article Creation and Management", adapting the process to ZVER and ZUNB Material master data management for GBU Technology Solutions (Legacy Cytec organization).

Material Master Data management process includes creation and modification of the packaging material as well as its inactivation and flagging for deletion. Creation of Basic Data, Sales, Purchasing and General plant data will be presented in this procedure. Finance and planning teams should be informed after packaging code creation and/or extension.

Requests of Material Master creation or maintenance can be performed by approved requestors listed in Appendix 2 - List of contacts.

For Composite Materials, the request will be sent via Sharepoints, in this case no additional approval is required.

All requests are sent to Master Data via Freshdesk or alternatively by e-mail. Common e-mail address of Riga SBS Data Management team: datamanage@solvay.com

Request form for packaging should usually be provided by requester. Link to the form can be found in Google Documents Template for RM and Packaging.

For Composite Materials, there is a template which is combined with ZMAT materials and will be provided in the Sharepoints/Freshdesk request.

The referral lists mentioned in this procedure, such as Purchasing Groups and Profit Center List are embedded in the TS SAP Material request form file.

1.2. Scope

Under Riga SBS Data Management's scope is the management of ZPRC, ZMAT, ZVER and ZUNB materials for GBU Technology Solutions and Composite Materials (legacy Cytec) sites in WP1 SAP system. Management of ZERS and ZMAT materials is described in separate procedure. Riga SBS Data Management can create and extend ZDIE materials if requested so by Finance.

Material Type	Description	Division
ZMAT	Finished Goods Semi-finished Goods Raw Materials	Multiple Multiple KV
ZPRC	Commercial Products	N/A
ZVER	Packaging	WD
ZUNB	Stocked and non-valuated materials	WD (for packaging)
ZDIE	Services	Multiple

1.3. Abbreviations

Abbr.	Description	Abbr.	Description
RCS	Rhodia Core System	SBS	Solvay Business Services
ZMAT	Finished product, semi-finished product, raw material	HSE	Health, Safety and Environment
ZVER	Packaging	DG	Dangerous goods
ZUNB	Stocked and not valuated material	MRP	Material Resource Planning
ZDIE	Service	UoM	Unit of Measure
ZPRC	Commercial Product

1.4. Roles and responsibilities

ZVER setup can be performed only once MOC-ID code is available.
Prior to submitting a new ZVER/ZUNB request, it is the requester´s responsibility to ensure the material does not exist in SAP already, so no duplicates are created in the system. If the material was not found, the TS SAP Material request form must be filled and submitted to Data Management for material master setup in SAP. A second search in the system is performed by the Data Management team to ensure no duplicates are created.

2 STANDARD OPERATING PROCEDURE DESCRIPTION

2.1. Creation of ZVER material in RCS

2.1.1. Pre-requisites - Technology Solutions

ZVER setup can be performed only once MOC-ID available.
In all cases when MOC-ID is missing Lindsay Schramm and HazCom team should be contacted to clarify whether ZVER code can be set up without this information.
Prior to material creation in the system search is performed by the Data Management team to ensure no duplicates are created.

2.1.1.1. Accessing MOC Gensuite Portal

ZPRC and PRCO can be found validating MOC in Gensuite Portal.
Data Operations > SAP WP1 Packaging Maintenance > worddav44ab840a00e5a100d444db86866eab36.png

User: data.manage@solvay.com
Password: Solvay123
Once you access the MOC Portal, please:

Check if the site is marked as General, Technology Solutions.
In order to see the MOC, access Applications
Click on MOC Manager

Data Operations > SAP WP1 Packaging Maintenance > worddav97c9b0b46ebd8d16091648751cf87043.png

In this step:

Change the process to Packaging Change
Remove the Assigned to
Change the status to All

Data Operations > SAP WP1 Packaging Maintenance > worddav439a25730155affe1bda2e94c679a7a6.png

Add the MOC# in the search field
Click on the Request ID Type to access the documents for the MOC

Data Operations > SAP WP1 Packaging Maintenance > worddavc1ab7855c6503889a0f5c8df64b0acb0.png
Important documents and information to be observed in the MOC

Screening Questions

Go to Screening questions
Manage requests
Print request

Data Operations > SAP WP1 Packaging Maintenance > worddav109282e2548976390572989a169f28cb.png

Print preview

Data Operations > SAP WP1 Packaging Maintenance > worddav10daecae8af905dbdd071267e324f282.png

The plant to which the raw material will be created
The Impacted Business Unit (this information will be used to determine the profit center and purchase group).

Data Operations > SAP WP1 Packaging Maintenance > worddav357b4d58fae044e662ba3fc58664302e.png

Completed Packaging request form should be attached for all ZVER codes. ZVER description must follow
Packaging rules table which can be found here - Packaging Instructions

2.1.1.2 Checking for duplicates

Data Operations > SAP WP1 Packaging Maintenance > worddav5b54ea30a360caca255eed245edaa453.png

#	Main activities	Tips / Best practices	Key points
1	Enter transaction MM03	T-code can be entered directly in Command field. T-code can be saved in Favorites.	Full path: Logistics -> Materials Management -> Material master -> Material -> Display

Data Operations > SAP WP1 Packaging Maintenance > worddava3e27f1348d60edf649f8e61a9e7ac7a.png

#	Main activities	Tips / Best practices	Key points
2	Press multiple choice button to receive pop-up window with search options for material master

Data Operations > SAP WP1 Packaging Maintenance > worddav581ecaad5c7f88a19deef33615a38f83.png

#	Main activities	Tips / Best practices	Key points
3	Click on to open the menu
4	Select the option 'Material Number/Material Description'	Field 'Old material number' can be used to look up material by BPCS Code (temporarily).

Data Operations > SAP WP1 Packaging Maintenance > worddavfeb1831733d57b9c6da3d9bbdb684671.png

#	Main activities	Tips / Best practices	Key points
5	Run a search in Material Description	Use Wildcards to best describe	Open the material request form, copy the short text from the requested material and run a search in Material description with wildcards.
6	Hit Enter

Data Operations > SAP WP1 Packaging Maintenance > worddav0bdf4fc1941fe09bc9e5cd0b551ea6a0.png

#	Main activities	Tips / Best practices	Key points
7	Verify entries found – compare results with the material's "short description" mentioned in the request form. If you have doubts about the material already created, contact the Requester to clarify.		If result points to or if the Requester mentions a new article need to be created then proceed with the creation.

2.1.2. Creation of material

Data Operations > SAP WP1 Packaging Maintenance > worddavf22adbdff4bafa9c70eb67eaa6974b9a.png

#	Main activities	Tips / Best practices	Key points
8	Enter transaction MM01	T-code can be entered directly in Command field. T-code can be saved in Favorites.	Full path: Logistics -> Materials Management -> Material master -> Material -> Create (General)

Data Operations > SAP WP1 Packaging Maintenance > worddav4b926da550b5c9fef2c8666a5397b57d.png

#	Main activities	Tips / Best practices	Key points
9	Enter Industry Sector		Always choose "Chemical Industry"
10	Enter Material Type		Always ZVER for packaging
11	Copy from… Material	Option to copy data from an existing material can be useful in some cases.
12	Hit Enter

Data Operations > SAP WP1 Packaging Maintenance > worddav38f0fb3c92abce4f75a989284b46d71d.png

#	Main activities	Tips / Best practices	Key points
13	Select Views to be created	Creation of views can be performed all at once or in separate steps	Select Basic Data 1 & 2, Sales: General /Plant Data, Purchasing, General plant Data / Storage 1, General plant Data / Storage 2 List of single Storage locations can be found in Appendix 3 Sales Organization and Distribution Channel should not be filled by creation. NOTE! Warehouse Management 1 & 2 Views to be created and warehouse number added (in brackets) for warehouse managed plants only: 8520 (077), 8521 (054), 8522 (076), 8712 (C26), 8636 (K19) – by default. For 8359 - only if requested.
14	Hit Enter	Use Default Setting button to save your selections for future creations

Data Operations > SAP WP1 Packaging Maintenance > worddavf46e0b9056ba96ae8355dd9b6478ebbf.png

#	Main activities	Tips / Best practices	Key points
15	Fill in Organizational Levels	Fill Plant as indicated in request form and add Storage Location. Appendix 3. Note: Sales Organization and Distribution Channel should not be filled.	Storage location should be added for plants when only one option is available For Composite Check Appendix 5 and open the material for all storage locations correspondent to each plant.
16	Hit Enter

Data Operations > SAP WP1 Packaging Maintenance > image2020-2-11_11-58-33.png

#	Main activities	Tips / Best practices	Key points
17	Enter Packaging Description	Check the request form for "SHORT DESCRIPTION"	Technology Solutions: Should be checked whether description meets Packaging instructions. [Packaging name + dimensions + capacity + specific characteristics (if exists)] Composite Materials: Copy from the template.
18	Enter Base Unit of Measure		Technology Solutions: Always PC Composite Materials:
19	Enter Material Group		Technology Solutions: Should be checked by type of packaging in Packaging Instructions table. Composite Materials: Check the request form
20	Enter Division		Always WD
21	Enter General Item Category Group		Always VERP
22	Enter UoM for Weight		Always KG
*	Gross Weight	For Composite Materials and pallets only	Check the request form
*	Net Weight	For Composite Materials and pallets only	Check the request form
*	Enter Ref. mat. for pckg	For Composite only!	Enter default number 1911973
23	Go to Descriptions tab	From Basic Data View Descriptions tab can be accessed by pressing Additional Data button in the top part of screen as well. Tabs in Additional Data can be filled in any sequence.

Data Operations > SAP WP1 Packaging Maintenance > worddav8551476195d3fa1280cb2943c098d662.png

#

Main activities

Tips / Best practices

Key points

27

Enter material descriptions in local languages

Request for should be checked for descriptions in other languages e.g.

ZH – Chinese might be indicated in original language.

12 mandatory languages are:
EN – English
Z9 – Brazilian Portuguese
ZH – Chinese
KO – Korean
DE – German
FR – French
IT – Italian
JA – Japanese
PL – Polish
PT – Portuguese
ES – Spanish
NL – Dutch

28

Return to Main Data

For Composite only

Data Operations > SAP WP1 Packaging Maintenance > image2020-2-16_18-27-51.png

#

Main activities

Tips / Best practices

Key points

a.

Enter Alternative units of measure

Default conversion should be added for all packaging materials 1EA = 1PC

Copy from the template if nay additional conversion informed.

b.

Go to Basic data text

Data Operations > SAP WP1 Packaging Maintenance > image2020-2-16_18-34-34.png

#	Main activities	Tips / Best practices	Key points
c.	For Composite - material long description (copy from the form)	Use button to add languages Copy English text to all other languages:	12 mandatory languages are: 1 – Chinese (EN!) E – English F – French D – German I – Italian J – Japanese 3 – Korean L – Polish P – Portuguese S – Spanish & – Brazilian Portuguese N – Dutch
d.	Return to Main Data

Data Operations > SAP WP1 Packaging Maintenance > worddav81bb08b293cff357e34fdd18640d5020.png

#	Main activities	Tips / Best practices	Key points
29	Go to Basic data 2 view
30	Enter Basic material	Generic ZPRC number for all ZVER materials	Always 90029754
31	Go to Sales: general/plant view

Data Operations > SAP WP1 Packaging Maintenance > worddav0e6c488aabbce76441feeb012b59d41a.png

#	Main activities	Tips / Best practices	Key points
35	Enter Availability check		Technology Solutions: Always 02 Composite Materials: Always KP
36	Enter Transportation Group		Always 0001
37	Enter Loading Group		Always 0001
***	Packaging Mat type	Entered only for Pallets	0001
38	Enter Profit Center		Technology Solutions: List of profit centers can be found in following link. Composites Materials: Check the request form
39	Go to Purchasing view

Data Operations > SAP WP1 Packaging Maintenance > worddavbddcf6c0c6073a80db5b40ed47f4eca6.png

#	Main activities	Tips / Best practices	Key points
40	Enter Purchasing Group		Technology Solutions: List of purchasing groups can be found in following ZVER Purchasing Groups Composite Materials: Check the request form
41	Enter Plant-specific material status	Once Finance creates Accounting and Costing Views and performs material costing run, the status will be removed by Finance to allow use of material in operations.	Status Z1 is to be used at the time of material creation.
42	Activate automatic Purchase Order indicator		Always checked
43	Enter Purchasing value key		Always 0001
44	Enter GR processing time	Plant data administrators will change the field value if necessary	Default value at the time of material creation – 2
45	Go to next view	Plant data / storage 1 view

Data Operations > SAP WP1 Packaging Maintenance > worddav6fe597803c2b5d1592e83614224c5a13.png

#

Main activities

Tips / Best practices

Key points

46

Enter Physical inventory indicator for cycle counting

Plant data administrators will change the field value if necessary

Technology Solutions: Default value at the time of material creation – B

Composite Materials: Check the request form

47

Go to Plant data / storage 2 view

Nothing should be entered as Profit center data are being copied from Sales: general/plant view

48

Save material

NOTE! Technology Solutions: After material code is created Finance and Planning teams from appropriate plant should be informed to create missing views, contacts can be found in TS MM Support Organization file.

2.1.3. Extension of material

Following MOC procedure plants are obligated to review existing MOC process every two to three years, therefore valid MOC ID is mandatory component for Packaging extension, this information should be provided by requester any time material should be created for a new plant.

Lindsay Schramm should be contacted in case of missing MOC-ID.

NOTE: Raw Materials and Packaging should not be extended to Trading plants (8572 – MX, 8573 – CL, 8571 – PE, 8580 – NL, 7788 – ID, 7786 – AU, 8574 - CN).

To extend material enter transaction MM01. Copy from… option can be used, preferably to copy from an existing view of the same material.

Data Operations > SAP WP1 Packaging Maintenance > worddave3a2fde6ae5ad1de1f0b01b36a3d3cc3.png

To extend ZVER material to a Plant, select Sales: General/Plant Data, Purchasing, General Plant Data/Storage 1 & 2.

Data Operations > SAP WP1 Packaging Maintenance > worddav665a5744844b0e91754099b25f493bb5.png

2.1.4. Extension of Composite Materials to Sales Organization view

If provided in the form, extended the composite materials for sales organization as per image below:

Data Operations > SAP WP1 Packaging Maintenance > image2020-2-16_18-55-47.png

#	Main activities	Tips / Best practices	Key points
1	Enter Cross-distribution-chain specific material status		Status 63 is to be set at the moment of material creation to allow use of material in operations
2	Enter Valid from date for Cross-distribution-chain specific material status	DD.MM.YYYY
3	Maintain Tax classifications	System will automatically determine which Countries' tax lines should be added	Always 1 for all countries unless otherwise indicated by Finance or Tax department
4	Go to Sales: sales org. 2 view

Data Operations > SAP WP1 Packaging Maintenance > image2020-2-16_18-59-53.png

#	Main activities	Key points
5	Enter Material statistics group	Always 1
6	Enter Account assignment group	Check the request form, if not provided populate with F
7	Enter Item category group	Always VERP
8	Save the extension

2.2. Creation of ZBOM material in RCS

Requester should provide us with correct Description and Plant where material should be created.

Data Operations > SAP WP1 Packaging Maintenance > worddavf22adbdff4bafa9c70eb67eaa6974b9a.png

#	Main activities	Tips / Best practices	Key points
1	Enter transaction MM01	T-code can be entered directly in Command field. T-code can be saved in Favorites.	Full path: Logistics -> Materials Management -> Material master -> Material -> Create (General)

Data Operations > SAP WP1 Packaging Maintenance > image2019-12-30_15-32-50.png

#	Main activities	Tips / Best practices	Key points
2	Enter Industry Sector		Always choose “Chemical Industry”
3	Enter Material Type		Always ZBOM for Phantom assemblies
4	Copy from… Material	Option to copy data from an existing material can be useful in some cases.
5	Hit Enter

Data Operations > SAP WP1 Packaging Maintenance > image2019-12-30_15-47-6.png

#

Main activities

Tips / Best practices

Key points

6

Select Views to be created

Creation of views can be performed all at once or in separate steps

Select Basic Data 1, Basic Data 2, MRP 1, MRP 2, MRP 3, MRP 4,

Sales Organization and Distribution Channel should not be filled.

7

Hit Enter

Use Default Setting button to save your selections for future creations

Data Operations > SAP WP1 Packaging Maintenance > image2019-12-30_15-50-59.png

#

Main activities

Tips / Best practices

Key points

8

Fill in Organizational Levels

Fill Plant as indicated in request.

Sales Organization and Distribution Channel should not be filled.

Storage location should be added for plants when only one option is available

9

Hit Enter

Data Operations > SAP WP1 Packaging Maintenance > image2019-12-30_16-1-49.png

#	Main activities	Tips / Best practices	Key points
10	Enter Phantom Description		Check the request
11	Enter Base Unit of Measure		Always EA
12	Enter Material Group		Always 0450
13	Enter Division		Always WD
14	Enter Gross Weight		Always 1
15	Enter Net Weight		Always 1
16	Enter UoM for Weight		Always KG
17	Go to Descriptions tab	From Basic Data View Descriptions tab can be accessed by pressing Additional Data button in the top part of screen as well. Tabs in Additional Data can be filled in any sequence.

Data Operations > SAP WP1 Packaging Maintenance > image2019-12-30_16-22-2.png

#

Main activities

Tips / Best practices

Key points

18

Enter material descriptions in local languages

Request for should be checked for descriptions in other languages

e.g. ZH – Chinese might be indicated in original language.

12 mandatory languages are:

EN – English

Z9 – Brazilian Portuguese

ZH – Chinese

KO – Korean

DE – German

FR – French

IT – Italian

JA – Japanese

PL – Polish

PT – Portuguese

ES – Spanish

NL – Dutch

19

Go to Basic data text tab

Data Operations > SAP WP1 Packaging Maintenance > image2019-12-30_16-23-51.png

#	Main activities	Tips / Best practices	Key points
20	Enter Basic data text – same as material description.	Use button to add languages Copy English text to all other languages:	12 mandatory languages are: 1 – Chinese (EN!) E – English F – French D – German I – Italian J – Japanese 3 – Korean L – Polish P – Portuguese S – Spanish & – Brazilian Portuguese N – Dutch
21	Return to Main Data
22	Go to Basic Data 2 view	No data has to be maintained in Basic Data 2, however the view has to be created
23	Go to MRP1 view

Data Operations > SAP WP1 Packaging Maintenance > image2019-12-30_16-31-45.png

#	Main activities	Tips / Best practices	Key points
24	Enter MRP Type		Default value – PD
25	Enter MRP Controller		Default value – P05
26	Enter Lot Size		Default value – EX
27	Go to MRP 2 view

Data Operations > SAP WP1 Packaging Maintenance > image2019-12-30_16-34-59.png

#	Main activities	Tips / Best practices	Key points
28	Enter Special procurement		Default value – 50
29	Enter Backflush		Default value – 2
30	Go to MRP 3 view

Data Operations > SAP WP1 Packaging Maintenance > image2019-12-30_16-37-29.png

#	Main activities	Tips / Best practices	Key points
31	Enter Period Indicator		Default value – M
32	Enter Availability Check		Default value – KP
33	Go to MRP 4 view

Data Operations > SAP WP1 Packaging Maintenance > image2019-12-30_16-41-21.png

#	Main activities	Tips / Best practices	Key points
34	Enter Individual/coll.		Default value – 2
35	When all data has been entered, save the material by pressing button and exit material creation

2.3. Material modification

2.3.1. Pre-requisites

Material modification is allowed only if validated by all Plants using the material.

Requests to change Base unit of Measure must not be performed – in this case a new material has to be created.

Another exception can be a mistake for recently created material that has not yet had any stock and stock movements in the system.

Data Operations > SAP WP1 Packaging Maintenance > worddav73981ecde5db95787c63807f26d12742.png

#	Main activities	Tips / Best practices	Key points
1	Enter transaction MM03	T-code can be entered directly in Command field. T-code can be saved in Favorites.	Full path: Logistics -> Materials Management -> Material master -> Material -> Display

Data Operations > SAP WP1 Packaging Maintenance > worddav881c93cf6c5bb7cfee8c4515c2ec1a43.png

#	Main activities	Tips / Best practices	Key points
2	Enter Material number
3	Select Purchasing (or Sales: General/Plant Data) view

Data Operations > SAP WP1 Packaging Maintenance > worddav518630af65409ec23311a0c7e1b8e2aa.png

#	Main activities	Tips / Best practices	Key points
4	Verify the possible Plants related to the Material by clicking on the match code.
5	All Plants using the material are listed

If material is open for more than one Plant, contact the other Plants to validate the requested modification.

If the answer is positive, change the material as shown in section 2.2.2. Manual modification of material.

If the answer is negative, create a new material as described in Chapter 2.1.2. of this OP, associated with the Plant that made the request.

2.3.2. Manual modification of material

Data Operations > SAP WP1 Packaging Maintenance > worddavf7e41e1eb2525a1507a02643d4d31120.png

#	Main activities	Tips / Best practices	Key points
1	Enter transaction MM02	T-code can be entered directly in Command field. T-code can be saved in Favorites.	Full path: Logistics -> Materials Management -> Material master -> Material -> Change
2	Select the view containing the field that needs modification
3	Select the Organizational Level for which the modification is requested	Repeat the modification for all Sales Areas or Plants if applicable.
4	Save the changes performed

Appendix 1 – List of contacts

Requests for Packaging requests can be accepted from Purchasing representative.
Detailed Technology Solutions Support Organization file by plants can be found in following link.

Region	Representative	Email
US and Canada	Vanessa Scott	vanessa.scott@solvay.com
	Leslie Fleming	leslie.fleming@solvay.com
	Lori Collins	lori.collins@solvay.com
	Thierry Leclerc	thierry.leclerc@solvay.com
	Mario Bruins	mario.bruins@solvay.com
LAM	Yarian Cuenca	yarian.cuenca@solvay.com
LAM	Abril Gomez	abril.gomez@solvay.com
APAC	Natpapan Chueakongtrakul (Poon)	natpapan.chueakongtrakul@solvay.com
	Celine Koh	celine.koh@solvay.com
	Catherine Lu	catherine.lu@solvay.com
	Sorrawit Parknondhkul	sorrawit.parknondhkul@solvay.com
	Nathan Purvis	nathan.purvis@solvay.com
EMEA	Thierry Leclerc	thierry.leclerc@solvay.com
ZPRC/MOC	HazCom	hazcom.rawmat@solvay.com
MOC-ID	Lindsay Schramm	Lindsay.schramm@solvay.com

Appendix 2 – List of Plants in non-GTS countries

Whenever a material is extended to any of non-GTS plants, extension has to be added in a file to notify the responsible team. Location of the file.

Country	Plant Code	Description
Japan	8524	7418 / Gas Chem Logistic Osaka
Singapore	8506	6062 / Poh Tiong Choon Jurong

Appendix 3 – List of Single Storage Locations

Storage Location	Description
8380	7786 / JF Hillebrand Fremantle
8433	7788 / Jakarta
8496	7722 / BDP Peru Arequipa
8500	7725 / Andimex San Antonio
8503	7988 / Daesung Whse Yangsan
8505	7723 / FH Logist Azcapotzalco
8506	6062 / Poh Tiong Choon Jurong
8507	7725 / Sercabol Antofagasta
8508	7776 / Sinotrans Intl Shanghai
8509	7734 / KWE Logistics Shanghai
8511	7794 / CML Ltd Walvis Bay
8515	7786 / Toll Contr Laverton Nth
8519	7786 / NSS Port Sth Townsville
8520	7008 / XPO Logistic Bristol
8521	7008 / XPO Logistic La Porte
8522	7008 / XPO Logistic Plainfield
8525	7523 / NATAM Express Maua
8527	7794 / Schenker Kempton Park
8528	7734 / Sinotrans Intl Shanghai
8543	7008 / KEMIRA WATER MOBILE
8545	7008 / FLUID ENERGY HATFIELD
8548	7008 / MOBILE SOLVENT EIGHT MILE
8549	7752 / NOVA MOLECULAR PASADENA
8553	7008 / SOUTH COAST HOUSTON
8554	7008 / SPRAY TEK MIDDLESEX
8559	7008 / TOLL COMPACTION NEPTUNE
8589	7734 / Tianjin DLD Beicheng Wh
8605	7794 / Kemira Chem Bradford
8614	7734 / COSCO Logistic Tianjin
8617	7776 / COSCHEM Logist Shanghai
8618	7794 / Praxair Oevel-Westerlo

Appendix 4 – Sinequa

Link to Sinequa Portal
Data Operations > SAP WP1 Packaging Maintenance > worddav2b234d08190e5fc7b9578afdac65233d.png

Appendix 5 – Storage location for Composite Materials

ROLLOUT	SOLSTICE PLANT	PLANT DESCRIPTION	SLOC	SLOC DESCRIPTION
R1	8367 - 7180 Piedmont		CENT	Main Warehouse
			GP1A	GP1 Area
			GP2A	GP2 Area
			GP3A	GP3 Area
			PRIF	Priform
			PTCH	Pitch
			RWRK	Rework Warehouse
			SPIN	Spinning
			STRM	Store Room
			TANK	Tanks
			RHWF	RH White Fiber
			TWST	Twisting
	8785	7180 Rock Hill	PROD	Prod. Warehouse
			RETN	Returns
			RWRK	Rework
			STRM	Store Room
	8350	7771 Wrexham	ADFL	ADH Plant Film
			ADLL	ADH Laminator
			ADRD	ADH Roll Doctor
			ADRM	ADH Resin Room
			ADSL	ADH Slitter
			ADWI	Adh WIP
			CENT	Main Warehouse
			CUST	Send to customer
			MABC	Main Braid Coat
			MSKR	Main Kroenert
			MSLA	Main Laminator
			MSRB	Main Re-Batcher
			MSRM	Main Resin
			MSSL	Main Slitter
			MST1	Main Tape 1
			MST3	Main Tape 3
			MST4	Main Tape 4
			MSWI	Main WIP
			MTO1	Tower 1
			MTO2	Tower 2
			PROS	Proserve
			RWRK	Rework
			STR1	Store Room Main
			STR2	Store Room Adhe
			TNKA	Tanks - Adhesive
			TNKM	Tanks - Main
	8822	7180 / Palmetto Greenville SC	8822	Palmetto
	8822	7180 / Palmetto Greenville SC	RHWF	RH White Fiber
	8802	7771 / K&N Non-Bonded Reading	KNNB	K&N WH non bond
	8796	7771 / K&N Bonded Reading	KNBO	K&N WH - Bonded

Appendix 6 – Data Governance List for Composite Materials

Wrexham:
Stuart Tudor Jones - backup Dave Harvey

CCF:
Harrison Blackwelder - backup Mike Zitricki

Texas:
Hope Helton - backup Brianna Hammond

Anaheim:
Lisa McGee - backup Rehan Surhwardy

Orange:
Corinne Nelson - backup Ryan Walker

D'Air:
Bruce Gormley

Kalamazoo:
TBD

Appendix 7 – List of plants for Composite Materials

Plant	Name of Plant in SAP	Company Code	Sales Organization	Country
8341	8341 - 7180 / Tempe	7180	US32 - Composite Materials	USA
8347	8347 - 7772 Oestringen	7772	DE13 - Composites Materials	Germany
8350	8350 - 7771 Wrexham	7771	GB40 - Composites Materials	United Kingdom
8361	8361 - 7180 Orange	7180	US32 - Composite Materials	USA
8363	8363 - 7180 Anaheim D'Aircraft	7180	US32 - Composite Materials	USA
8364	8364 - 7180 Anaheim	7180	US32 - Composite Materials	USA
8365	8365 - 7180 Greenville	7180	US32 - Composite Materials	USA
8367	8367 - 7180 Piedmont	7180	US32 - Composite Materials	USA
8368	8368 - 7180 Havre de Grace	7180	US32 - Composite Materials	USA
8370	8370 - 7180 Winona	7180	US32 - Composite Materials	USA
8374	8374 - 7180 / Bellevue	7180	US32 - Composite Materials	USA
8393	8393 - 7771 / Wilton	7771	GB40 - Composites Materials	United Kingdom
8456	8456 - 7180 Kalamazoo	7180	US32 - Composite Materials	USA
8466	8466 - 7188 / Tempe CDM	7188	US32 - Composite Materials	USA
8586	8586 - 7776 / Shanghai	7776	Tech Solutions (CEM)	China
8609	8609 - 7180 / Alpharetta	7180	US32 - Composite Materials	USA
8626	8626 - 7180 / Saddle Brook	7180	US32 - Composite Materials	USA
8628	8628 - 7776 Fengxian	7776	Composites Mats 7776	China
8785	8785 - 7180 Rock Hill	7180	US32 - Composite Materials	USA
8786	8786 - 7180 / Princeton	7180	US32 - Composite Materials	USA
8793	8793 - 7180 / ATSCOTT MFG Pine City	7180	US32 - Composite Materials	USA
8794	8794 - 7180 / MCC Huntington Beach	7180	US32 - Composite Materials	USA
8795	8795 - 7180 / ET Horn La Mirada	7180	US32 - Composite Materials	USA
8796	8796 - 7771 / K&N Bonded Reading	7771	GB40 - Composites Materials	United Kingdom
8802	8802 - 7771 / K&N Non-Bonded Reading	7771	GB40 - Composites Materials	United Kingdom
8815	8815 - 7180 / Taichung City	7180	US32 - Composite Materials	USA
8817	8817 - 7180 / Hale Baltimore	7180	US32 - Composite Materials	USA
8818	8818 - 7180 / First Choice Vineland	7180	US32 - Composite Materials	USA
8819	8819 - 7180 / XPO Logistics Levittown	7180	US32 - Composite Materials	USA
8820	8820 - 7180 / Lonestar Richardson	7180	US32 - Composite Materials	USA
8821	8821 - 7180 / Delta Greenville TX	7180	US32 - Composite Materials	USA
8822	8822 - 7180 / Palmetto Greenville SC	7180	US32 - Composite Materials	USA
8823	8823 - 7180 / Seven Rivers Winona	7180	US32 - Composite Materials	USA
8824	8824 - 7180 / Rinchem Eagan	7180	US32 - Composite Materials	USA
8825	8825 - 7180 / KPAC Wilmington	7180	US32 - Composite Materials	USA
8826	8826 - 7180 / Lewis Howard Kalamazoo	7180	US32 - Composite Materials	USA
8834	8834 - 7180 / Jensen-Souders Itasca	7180	US32 - Composite Materials	USA
8845	8845 - 7180 / eShipping Ontario	7180	US32 - Composite Materials	USA