Strain controlled rheometer with high sensitivity for low viscosities.

Geometries: parallel plates, cone & plate, concentric cylinders.

Temperatures: -20 to +60 °C.

Strain controlled rheometer to measure viscoelasticity of polymer melts

Geometries: parallel plates.

T from +30 to +400 °C.

Stress controlled rheometer for steady and dynamic measures from fluids to polymer melts.

Geometries: parallel plates, cone & plate, concentric cylinders.

Dynamic Mechanical Analysis with torsional geometry.

T from -150 to +500 °C.

Strain controlled rheometer for steady and dynamic measures from fluids to polymer melts.

Geometries: parallel plates, cone & plate, concentric cylinders.

Dynamic Mechanical Analysis with torsional geometry.

T from -150 to +400 °C.

Polishing machine equipped with an autosampler, to prepare embedded sections and surfaces, with a finish at 0,25 µm.

Microtome to prepare cuts of samples, at room temperature, with a thickness in the range 0,5-50 µm.

Fracture of frozen of samples in liquid nitrogen (-196°C), to prepare sections of soft samples.