PTU, axel, pinion, differential, wheel hub seals
Provides sealing of the driveline systems downstream from the trans.
Tecnoflon P types
Tecnoflon PL types
Tecnoflon VPL types
Tecnoflon BR types
Luca Colombo
- >150°C operation
- Gear lube + FM + ATF
- Low temp flexibility
- Wear resistance
Engine crankshaft seals
Provides sealing of the rotary shafts entering and exiting the internal combustion engine
Tecnoflon® FOR bis-cure types
Tecnoflon® P757 & P457
Tecnoflon® P959 & P459
Luca Colombo
- >150°C operation
- Exposure to automotive engine oils –natural or syn.
- Diluted fuels –gas or diesel and combustion particulates
- Wear resistance
- Excellent compression set for non-spring types.
- up to 150°C operation
- exposure to automotive engine oils
- dimensional stability
Shock absorber seals
Provides sealing of the of the shock absorber (dampener) piston rod.
Tecnoflon® FOR grades (66%F terpolymer types)
Tecnoflon® PL grades
Tecnoflon® VPL85540
Luca Colombo
- Max temp: ~200°C in some limited situations.
- Excellent low temp flex.
- Extrusion / high pr. resistance leading to very high hardness seals
- Low friction/sticking
- Hydraulic fluid res.
Valve stem seals (VSS)
VSS do not stop all oil leakage but are designed to specifically meter oil along the valve guide and stem interface of both the intake and exhaust valves
Tecnoflon® FOR grades (copo, terpo preferred)
Tecnoflon® P 757 & P457
Tecnoflon® P959 & P459
Tecnoflon® BR9151
Luca Colombo
- >150°C operation
- Exposure to automotive engine oils –natural or syn.
- Diluted fuels –gas or diesel and combustion particulates
- Reciprocating wear resistance
Water pump seals
Provide effective sealing of the water pump module. Resistance to water/coolant and elevated temps is required
Tecnoflon® PL grades
Tecnoflon® VPL85540
Luca Colombo
- Coolant Resistance
- Acid/Base resistance for various coolant types
- Excellent low temp flex
- Excellent wear resistance
Spark plug tube seals
Tecnoflon® FOR grades
Tecnoflon® P757 & 457
Luca Colombo
- +150°C operation
- Eng oil/dil. fuel resistance
- Good CSR
Tecnoflon® P757 & P457
Tecnoflon® PLX756
Luca Colombo
- +200°C operation
- Eng oil/dil. fuel resistance
- Adhesion to metal
- Excellent CSR
- up to 150°C operation
- exposure to automotive engine oils and coolants (glycol/water)
- dimensional stability
Tecnoflon® FOR grades
Tecnoflon® P757 & 457
Tecnoflon® PL grades
Tecnoflon® VPL grades
Luca Colombo
- +150°C operation
- Eng oil/fuel, dil-fuel, acid/gas, coolant/water, ATF, Gear lube & resistance
- Extrusion/pressure res.
- Excellent CSR