Welcome to the Business Warehouse troubleshooting. You will find here most of the error messages, their meaning and solutions.

When opening Analysis

After an Excel crash, the Analysis menu is no longer visible.

Problem: After a Microsoft Excel crash, you reopen Analysis but the Analysis bar is no longer visible in the menu with the following error message :

Solution: To solve this you need to re-active the Analysis plug-in which has been deactivated by Excel.

1. Open Excel  -> File - >Options

   
2. Open "Options" -> Add-Ins" -> In Manage, select "Disabled Items“ -> Go.
   
3. In the "Disabled Items" dialog box, select the Analysis Add-In and click on "Enable".
   
4. In Manage box, select "COM Add-ins", press Go
   
5. Check the box in front of "Analysis", then click OK.
   
6. Then Analysis ribbon is activated.
   

Installation and troubleshooting : Installation Check

If you receive a message error you can check the installation log file by the installation check as described below:

• 1. Press Start - Run

• 2. Enter nwcheckworkstation

• 3. Continue the appearing wizard

• 4. Before clicking Finish make sure Checkbox "Collect diagnostic

• 5. information for SAP Support" is checked

• 6. Press Finish

On this file you have much information and to find the specific one you will check at the error folder.

On the folder you will be able to see the below error:

My report and Analysis are opened in two Excel programs

You need to first open "Analysis for Microsoft Excel", then open your BW file ( by File --> Open or Recent ).

Go to Open a workbook ( saved on your local drive ) for more detail.

Error message "Cannot run the macro "CallbackAfterWorkbookClosed"" 

Problem : Get the following error when opening Analysis, and the mouse cursor is all the time in "refreshing" status even no refreshing at all.

Solution : In Analyzer 7 , change the following Workbook setting to "Run Macro on Refresh". 

Error message "Installation error "Missing Active X"" 

Problem : the user is trying to use a reporting tool that is no more installed in his/her computer

Solution :

1. Check the tool you are trying to use is already installed (Start / All programms / ...)
2. If the tool is BW Analyser 3.x, please use Analysis tool instead.
3. If the tool is BW Analyser 7.x or Analysis, please contact your local Service Desk Infra to reinstall the tool
   

Can't access to SAP Logon

Problem : When opening a query/workbook, this screen is displayed, instead of the list of Servers.

Solution :

1. Click on SKIP
2. On the Analysis toolbar, go to SETTINGS
   
3. On Platform settings, select "NetWeaver" as your Preferred Plaform
   
4. Close all Excel files and restart Analysis to normally have access to the BW reports.
   
   
   

Why the folder names are not as usual when I logon BW ?

Problem : The folder names look as below

Analysis:

The reason might be the user's default logon language being not EN or FR or PT.

In the following example, it's ZH(Chinese), but the folder names in ZH are not well maintained.

Solution :

For long term, ask Helpdesk members to contact Authorization team to change the Logon Language to be EN or FR or PT.

For short term, when logging, the user can clicks on "Options >>" , then a language box will be shown and the user can input EN to select English.

When saving workbook

Can't save workbook onto WBP server

Problem: Users can't save a workbook onto the "My documents" folder in WBP server

Solution : No solution at the moment. It's like that

Why there is no data after I save the workbook ?

Problem : Why there is no data after I save the workbook ?

Solution :

In Design Panel / Components tab, on workbook level, uncheck the "Remove Data Before Saving" option.

BW team use this option to save a template ( with no real data ) on the server. So for many workbooks on the server, this option is checked by default.

When Refreshing

Can't refresh a workbook from others

Problem : I can't refresh a workbook from my colleague with error message :

Solution : 

The issue is due to your SAPLogon.ini being different from your colleague. You may need to ask local IT to upgrade your SAPLogon.ini.

Or a temporary solution :

In Design panel / Components tab, relocate the data source:

The message "Size limit of result set exceeded" returns

Problem : when you refresh with a broad condition, there are a lot of data to retrieve, Analysis display "Size limit of result set exceeded" in the result cell.

Reason:  There can be a size limit on the number of cells that SAP BO Analysis Office should manage, either on server side, or on client (Analysis) side. This limit throws the above message when the number of cells increases above the threshold value. 

Solution: The Size limit can be set to a higher value either in individual Client PC ( Option1 and what you need to do ) and the BW Server side (Option2).

Option1 : This is to be done by altering the Windows Registry Parameter.

Run the following command in Command Prompt (cmd.exe):

REG ADD HKCU\SOFTWARE\SAP\AdvancedAnalysis\Settings\DataSource /v ResultSetSizeLimit /t REG_SZ /d 9000000

This would set set the limit to a much higher value: 9000000 Cells.

Then try again, it should be ok.

If still not working, please save the file as "xlsm" file instead of “xlsx” and try again. This needs to be confirmed.

Option2: To maintain Size limit centrally. Please refer to http://scn.sap.com/thread/3459138

When Filter by Member

In Design Panel

Unable to see the workbook structure in Design Panel / Components tab

Problem : Unable to see the workbook structure in Design Panel / Components tab

Solution : 

1. Right click on desktop, and select "Personalize".
   
2. Click on Display.
   
   
3. Select "Smaller - 100%(default)", and apply. You need to relogon to make the change effective.

Red Cross in Columns

Problem :

Solution :

1. Save your work
2. Close all Excel files
3. Restart Analysis tool
4. Refresh your query/workbook
   
   

Can't click on the right Analysis Design panel

Problem : After opening a workbook, users receive an error message if they click on the Analysis Design Panel, at the right side of the screen

 ==> 

Solution : Refresh the workbook first, and then click on the Analysis Panel

Miscellaneous

Mouse is always displayed as a Timer

Problem : Once the refresh is over, the mouse still appears as a Timer, even if the user can normally works on Analysis.

Solution :     

1. In Excel, go to File / Options
   
   
   
2. Check in the Add-ins – Excel Add-ins
    
   
   
3. Untick the « Analysis Toolpak and the Analysis Toolpak-VBA
   
   
   
4. Save you work

Whenever Analysis is closed, a "MS Excel has stopped working" window will show

Problem: After Analysis is opened, when we try to close it, the following window shows. Then some seconds later, Excel was reopened without Analysis tab.

Solution : 

Same as the one above.

Go to Excel / File / Options / Add-ins, then select "Excel Add-ins" in "Manage", click Go.

Uncheck all the boxes below. 

Then the issue disappears.