Overview

Global description of filters use cases and features.


Use CaseMain ScenarioExtended ScenarioTarget DeliveryStakeholderSolution/Design
A DataLab user wants to apply a filter (on the entire page or on one module only).
  1. Go to all filters
  2. Choose a category
  3. Choose a filter attribute 
  4. Narrow down the attribute data
  5. All the filter attributes get their data updated accordingly
  6. All modules are updated and visible to the user
  7. Go back to the modules

2.b. If the desired filter is not found, open other categories and scroll through the list to locate the correct filter.

6.b Repeat steps 4-6 to narrow down the data displayed on the table and the bar chart until analysis is possible.

Q4 2024All DataLab users

A DataLab user wants to edit an applied filter.
  1. Go to all filters
  2. Go to the filter category
  3. Go to the filter attribute 
  4. Edit the attribute data
  5. All the filter attributes get their data updated accordingly
  6. All modules are updated and visible to the user
  7. Go back to the modules
 Q4 2024All DataLab users
A DataLab user wants to remove an applied filter.
  1. Go to all filters
  2. Go to the filter category
  3. Go to the filter attribute 
  4. Clear the data selection applied to the filter
  5. All the filter attributes get their data updated accordingly
  6. All modules are updated and visible to the user
  7. Go back to the modules
 Q4 2024All DataLab users
A DataLab user wants to apply several filters simultaneously (on the same module or on the whole page).
  1. Go to all filters
  2. Choose a category
  3. Choose a filter attribute 
  4. Narrow down the attribute data
  5. All the filter attributes get their data updated accordingly
  6. All modules are updated and visible to the user
  7. Repeat steps 3-6 with other filters
  8. Go back to the modules
 2.b. If the desired filter is not found, open other categories and scroll through the list to locate the correct filter.Q4 2024All DataLab users
A DataLab user wants to remove all applied filters (for one module or for the whole page).
  1. Go to all filters
  2. Click on 'Cancel all the filters'
  3. All the filter attributes get their data updated accordingly
  4. All modules are updated and visible to the user
  5. Go back to the modules


Q4 2024All DataLab users

A DataLab user wants to edit the value of a filter applied globally for one module only.  Q4 2024All DataLab users