Status
Owner	BUOSI-ext, Angelo HANCOCK-ext, John CLARKE-ext, Steve
Stakeholders	The business stakeholders involved in making, reviewing, and endorsing this decision. Type @ to mention people by name

Purpose

The purpose of this document is to define the conversion approach to upload Materials - Classification and Characteristic Assignment in S/4 HANA as part of the Material Data Migration.

Link to MDS: DD-FUN-050 Master Data Standard_2023-Materials - Classification and Characteristic Assignment

Summarise how the data is currently utilized and set up in the legacy system/s and how object is intended to be represented in S/4, and any other relevant information

Conversion Scope

The scope of this document covers the approach for converting active Values data, linked to Materials and Characteristics of Class Type 001, from Legacy Source Systems into S/4HANA following the Material Master Data Design Standard.

This object is migrated after Material Basic Data, therefore only materials in scope for the object "2019 - Materials Basic Data View" are in scope for this object.  Click here to go to the Conversion Spec for 2019 to see the full set of relevancy rules.

List of source systems and approximate number of records ***************

Source	Scope	Source Approx No. of Records	Target System	Target Approx No. of Records
DCT	Linking Materials (2019 - Materials Basic Data View) to Classes (2017 Material - Class Type 001)	Materials: 260,000 ** Classes: 4 ** As per Material relevancy criteria	S4H	197,141 ** ** This will change based on the Material Deduplication Process
DCT	Linking Classes to Characteristics (2018 Materials - Characteristics of Class Type 001)	Classes: 4 Characteristics: 41	S4H	164 ****** ****** Need info
DCT	Materials & Characteristics to Values assignment	Materials: 260,000 ** Characteristics: 39 ** This will change based on the Material Deduplication Process	S4H	10.14 Million
PF2 & WP2	Materials & Characteristics to Values assignment specifically for: Characteristics: Z_SY_MAT_OLD_PART_NUMBER & Z_SY_MAT_OLD_PART_DESCRIPTION Values: MARA-MATNR & MAKT-MAKTX, as well as the BAAN info.	Materials: 260,000 ** Characteristics: 2 ** This will change based on the Material Deduplication Process	S4H	520,000 ** ** This will change based on the Material Deduplication Process

Predecessor Object

2017 Materials - Class Type 001 → ​2018 Materials - Characteristics of Class Type 001 → 2023 Materials - Classification and Characteristic Assignment.
                                                                                  2019 Materials - Basic Data View ↗

Additional Information

Multi-language Requirement

Not Applicable

Document Management

Not Applicable

Legal Requirement

Not Applicable

Special Requirements

Specify any special requirements or considerations that may impact the data conversion process based on specific locations, regulatory compliance or system limitations. Clearly outline any regional or localization requirements such as country-specific data formats, legal reporting obligations or industry standards that must be adhered to (e.g., localization rules for countries like China).

If the data conversion involves third-party systems or external data sources, such as Icertis, describe any additional requirements related to data mapping, transformation logic, validation rules or security measures that must be followed.

Not Applicable

Target Design

With Functional input, document the technical design of the target fields that are in the scope of this document.

As per MDS.  This is for reference, see below for the actual requirement.

Table	Field	Field Description	Data Type	Length	Requirement
MARA	MATNR	Material Number	CHAR	18	Required
KLAH	KLART	Class type	CHAR	3	Required
KLAH	CLASS	Class	CHAR	18	Required
KSSK	STDCL	Indicator: Standard Class	CHAR	1	System
KSSK	STATU	Classification status	CHAR	1	System
KSSK	ZAEHL	Sort position	INT2	5	System
CABNT	ATBEZ	Characteristic Description	CHAR	30	System
AUSP	ATWRT	Characteristic Value	-	-	Required

The technical design of the target for this conversion approach.

Table	Field	Field Description	Data Type	Length	Requirement	Temp
MARA	MATNR	Material Number	CHAR	18	Required
MARA	MTART	Material Type	CHAR	4	Required
Table	Field	Field Description	Data Type	Length	Requirement	Temp
KLAH	CLINT	Internal Class Number	NUMC	10	Required
KLAH	CLASS	Class Name	CHAR	18	Required
Table	Field	Field Description	Data Type	Length	Requirement	Temp
CABN	ATINN	Internal Characteristic	NUMC	10	Required
CABN	ATNAM	Characteristic Name	CHAR	30	Required
Table	Field	Field Description	Data Type	Length	Requirement	Temp
CAWN	ATINN	Internal characteristic	NUMC	10	Required
CAWN	ATZHL	Int Counter	NUMC	4	Required
CAWN	ATWRT	Value	CHAR	70	Required
CAWN	ATSTD	Default Value	CHAR	1	Conditional
Table	Field	Field Description	Data Type	Length	Requirement	Temp
KSSK	OBJEK	Key of Object to be Classified	CHAR	90	Required
KSSK	MAFID	Indicator: Object/Class	CHAR	1	Required	Default to "O"
KSSK	KLART	Class Type	CHAR	3	Required
KSSK	CLINT	Internal Class Number	NUMC	10	Required
KSSK	STDCL	Indicator: Standard Class	CHAR	1	System
KSSK	STATU	Classification Status	CHAR	1	System
KSSK	ZAEHL	Sort Position	INT2	5	System
Table	Field	Field Description	Data Type	Length	Requirement	Temp
KSML	CLINT	Internal Class Number	NUMC	10	Required
KSML	POSNR	Item Number	NUMC	3	Required
KSML	IMERK	Internal Characteristic	NUMC	10	Required
KSML	KLART	Class Type	CHAR	3	Required
Table	Field	Field Description	Data Type	Length	Requirement	Temp
AUSP	OBJEK	Key of Object to be Classified	CHAR	90	Required
AUSP	ATINN	Internal Characteristic	NUMC	10	Required
AUSP	ATZHL	Characteristic Value Counter	NUMC	3	Required	Default to 1
AUSP	MAFID	Indicator: Object/Class	CHAR	1	Required	Default to "O"
AUSP	KLART	Class Type	CHAR	3	Required
AUSP	ATWRT	Characteristic Value	CHAR	70	Required

Data Cleansing

All data cleansing should take place in the data source system as defined in this document, unless system limitations prevent it.

If data cleansing is managed outside of the source system (e.g. Syniti Migrate, 3rd Party Vendor, DCT), the necessary documentation must be produced and appended to this deliverable for sign-off.

ID	Criticality	Error Message/Report Description	Rule	Output	Source System
		Not Applicable

Conversion Process

The high-level process is represented by the diagram below: ***************

Field Governance Rules
These governance rules apply to the individual fields within the data record.
Rule #	Field Label	Rule Description	Validation Method	Conditional Logic	Cleansing Rule (Also see Data Cleansing section above)
		Not Applicable

Data Privacy and Sensitivity

Summarize Data Privacy and Sensitivity Requirements, if any

Not Applicable

Extraction

The source for Classes to Characteristics is a Load-File/DCT (see below in the DCT section for more details).

The source for Materials to Classes is a Load-File/DCT (see below in the DCT section for more details) and is based on a mapping of Material Type to Class.

For Materials & Characteristics to Values, the source is a DCT****************.

The source for Materials & Characteristics to Values assignment specifically for Old Material Number and Description is PF2 & WP2

Where applicable above, the source for Materials is PF2 & WP2.  This will be extracted by Syniti and the Relevancy criteria, as specified in object "2019 - Materials Basic Data View", applied to identify the records that are applicable for the Target load.

Extraction Run Sheet

Req #	Requirement Description	Team Responsible
1	Extract data from source system based on relevancy rules.	Syniti
2	Extract data from the DCTs.	Syniti

Selection Screen

If applicable, this section will give the details on any selection screen parameters, including the parameter type, that are required to be entered to ensure consistent data extracts.

Selection Ref Screen	Parameter Name	Selection Type	Requirement	Value to be entered/set
Not Applicable

Data Collection Template (DCT)

Target Ready Data Collection Template will be created for Materials - Classification and Characteristic Assignment data with the fields requiring transformation as mentioned in the transformation rule.

DCT Rules for linking Materials to Classes (DCT.KSSK):

Field Name	Field Description	Rule	Tool Tip	zComment	zDelete
MTART	Material Type	Mandatory.  Use drop-down based on S4H.T134.	Key that groups materials, e.g. raw materials, finished products or trading goods.
CLASS	Class Name	Mandatory.  Use drop-down based on S4H.KLAH-CLASS.	Name used to uniquely identify a class within a class type.
KLART	Class Type	Read-only.  Default to "001".

DCT Rules for linking Classes to Characteristics (DCT.KSML):

Field Name	Field Description	Rule	Tool Tip	zComment	zDelete
CLASS	Class Name	Mandatory.  Use drop-down based on S4H.KLAH-CLASS.	Name used to uniquely identify a class within a class type.
ATNAM	Characteristic Name	Mandatory.  Use drop-down based on S4H.CABN-ATNAM.	Unique technical name identifying the characteristic (e.g. LENGTH, COLOR).

DCT Rules for Materials & Characteristics to Values assignment (DCT.AUSP):

Field Name	Field Description	Rule	Tool Tip	zComment	zDelete
OBJEK	Material Number	Mandatory. Based on PF2.MARA-MATNR and WP2.MARA-MATNR.	The Material Number will be used to identify the corresponding Target Material Number.
CLASS	Class Name	Mandatory.  Use drop-down based on DCT.KSSK-CLASS.	Name used to uniquely identify a class within a class type.
KLART	Class Type	Read-only.  Default to "001".
ATNAM	Characteristic Name	Mandatory.  Use drop-down based on DCT.KSML-ATNAM WHERE DCT.KSML-CLASS = DCT.AUSP-CLASS.	Unique technical name identifying the characteristic (e.g. LENGTH, COLOR).
ATWRT	Value	Mandatory. ---------------------------------------------------------------------- When a new DCT record is shown and once CLASS and ATNAM are selected, use default value of S4H.CAWN-ATWRT WHERE DCT.AUSP-ATNAM = S4H.CABN.ATNAM and S4H.CABN-ATINN = S4H.CAWN.ATINN and S4H.CAWN-ATSTD = 'X', else show a Blank. If the above cannot be done easily then leave it out. ---------------------------------------------------------------------- Use drop-down based on S4H.CAWN-ATWRT (Value) and S4H.CAWNT-ATWTB (Value Description) WHERE DCT.AUSP-ATNAM = S4H.CABN.ATNAM and S4H.CABN-ATINN = S4H.CAWN.ATINN and S4H.CAWN.ATINN = S4H.CAWNT.ATINN and S4H.CAWNT-SPRAS='E'.	List of permissible predefined characteristic values (e.g. RED, BLUE, GREEN).

Extraction Dependencies

List the steps that need to occur before extraction can commence

Item #	Step Description	Team Responsible
1	Data relevancy and deduplication of legacy Material data must be completed.	Syniti & S2P Data Team
2	As-Is to To-Be Material Type Mapping must be complete	S2P Data Team

Transformation

The Target fields are mapped to the applicable Legacy field that will be its source, this is a 3-way activity involving the Business, Functional team and Data team. This identifies the transformation activity required to allow Syniti ADMM to make the data Target ready:

1. Perform value mapping and data transformation rules.
   1. Legacy values are mapped to the to-be values (this could include a default value)
   2. Values are transformed according to the rules defined in ADMM.
2. Prepare target-ready data in the structure and format that is required for loading via prescribed Load Tool. This step also produces the load data ready for business to perform Pre-load Data Validation.

Transformation Run Sheet

Item #	Step Description	Team Responsible
1	Verify that Material data is extracted from both source systems.	Syniti / S2P Data Team
2	Verify that data has been loaded into the DCTs.	Syniti / S2P Data Team
3	Transformation jobs are ready for execution.	Syniti
4	Generate Load Files	Syniti

Transformation Rules

Transformation Rules for linking Materials to Classes:

Rule #	Source system	Source Table	Source Field	Source Description	Target System	Target Table	Target Field	Target Description	Transformation Logic
	S4H	MARA	MATNR	Material Number	S4H	KSSK	OBJEK	Key of Object to be Classified	WHERE DCT.KSSK-MTART = S4H.MARA-MTART
					S4H	KSSK	MAFID	Indicator: Object/Class	Default to "O"
					S4H	KSSK	KLART	Class Type	Default to "001"
	DCT	KSSK	CLASS	Class Name	S4H	KSSK	CLINT	Internal Class Number	Copy S4H.KLAH-CLINT WHERE DCT.KSSK-CLASS = S4H.KLAH-CLASS
					S4H	KSSK	STDCL	Indicator: Standard Class	Default to "X"
					S4H	KSSK	STATU	Classification Status	Default to "1"
					S4H	KSSK	ZAEHL	Sort Position	Default to 10.  If a material is assigned to a 2nd Class then default to 20.

Transformation Rules for linking Classes to Characteristics:

Rule #	Source system	Source Table	Source Field	Source Description	Target System	Target Table	Target Field	Target Description	Transformation Logic
	DCT	KSML	CLASS	Class Name	S4H	KSML	CLINT	Internal Class Number	Copy S4H.KLAH-CLINT WHERE DCT.KSML-CLASS = S4H.KLAH-CLASS
					S4H	KSML	POSNR	Item Number	Integer counter starting at 1 and incrementing by 1 for each CLINT.  When CLINT changes it starts from 1 again.
	DCT	KSML	ATNAM	Characteristic Name	S4H	KSML	IMERK	Internal Characteristic	Copy S4H.CABN-ATINN WHERE DCT.KSML-ATNAM = S4H.CABN-ATNAM
					S4H	KSML	KLART	Class Type	Default to "001"

Transformation Rules for Materials & Characteristics to Values assignment:

Rule #	Source system	Source Table	Source Field	Source Description	Target System	Target Table	Target Field	Target Description	Transformation Logic
	DCT	AUSP	OBJEK	Material Number	S4H	AUSP	OBJEK	Key of Object to be Classified	Copy As-Is.
	DCT	AUSP	ATNAM	Characteristic Name	S4H	AUSP	ATINN	Internal Characteristic	Copy S4H.CABN-ATINN WHERE DCT.AUSP-ATNAM = S4H.CABN-ATNAM.
					S4H	AUSP	ATZHL	Characteristic Value Counter	Default to 1
					S4H	AUSP	MAFID	Indicator: Object/Class	Default to "O"
					S4H	AUSP	KLART	Class Type	Default to "001"
	DCT	AUSP	ATWRT	Value	S4H	AUSP	ATWRT	Characteristic Value	Copy As-Is.

Transformation Rules for Materials & Characteristics to Values assignment for Old Material Number & Description:

Rule #	Source system	Source Table	Source Field	Source Description	Target System	Target Table	Target Field	Target Description	Transformation Logic
	S4H	MARA	MATNR	Material Number	S4H	AUSP	OBJEK	Key of Object to be Classified
					S4H	AUSP	ATINN	Internal Characteristic	Copy S4H.CABN-ATINN WHERE S4H.CABN-ATNAM = Old Material Number: 'Z_SY_MAT_OLD_PART_NUMBER' Old Material Description: 'Z_SY_MAT_OLD_PART_DESCRIPTION'
					S4H	AUSP	ATZHL	Characteristic Value Counter	Default to 1
					S4H	AUSP	MAFID	Indicator: Object/Class	Default to "O"
					S4H	AUSP	KLART	Class Type	Default to "001"
					S4H	AUSP	ATWRT	Characteristic Value	Old Material Number: Copy "Material XREF"-"AS-IS MATNR" WHERE "Material XREF"-"TO-BE MATNR" = S4H.MARA-MATNR Old Material Description: Copy ECC.MATK-MAKTX WHERE "Material XREF"-"TO-BE MATNR" = S4H.MARA-MATNR and "Material XREF"-"AS-IS MATNR" = ECC.MATK-MATNR

Transformation Mapping

Use the exact name and reference this section in the “Transformation rules” above

Mapping Table Name	Mapping Table Description	Link
Material	XREF	Conversion Specification - Mappings

Transformation Dependencies

List the steps that need to occur before transformation can commence

Item #	Step Description	Team Responsible
1	Ensure DCT tables completeness	SyWay S2P Data Team
2	Value Mappings are according to the latest design - <List of Value Mappings>	SyWay S2P Data Team

Pre-Load Validation

Project Team

The following pre-load validations will be performed by the Project Team.

Completeness

Task	Action
Verify Record Count	SyWay S2P Data Team to verify that the total number of relevant records from the  DCT is equal to the total number of records in the Preload and Load Sheets.

Accuracy

Task	Action
Conversion Accuracy	SyWay S2P Data Team to verify that all fields below meet pass the checks: Mandatory Fields Field and Value Mapping Correctness Null Checks Text Length Checks
Review Error Reports	Review and correct the errors.  Achieve a zero-error record count as much as possible. Raise defects for data remediated and requiring a correction in the source data.

Business

The following pre-load validations will be performed by the business.

Completeness

Task	Action
Verify Record Count	Business Data Owner/s to verify that the total number of relevant records from the the DCT is equal to the total number of records in the Preload and Load Sheets.

Accuracy

Task	Action
Conversion Accuracy	Business Data Owner/s to verify that all the data in the load table/file is accurate as per endorsed transformation/mapping rules (and signed-off DCT data).

Load

The load process includes:

1. Execute the automated data load into target system using load tool or product the load file if the load must be done manually
2. Once the data is loaded to the target system, it will be extracted and prepared for Post Load Data Validation

Load Run Sheet

Item #	Step Description	Team Responsible
1	Go to <Load Tool>	SyWay S2P Data Team
2	Load 3 records for < > to validate if data is loaded successfully without errors	SyWay S2P Data Team
3	Load 3 records for < > to validate if data is loaded successfully without errors	SyWay S2P Data Team
4	Proceed with full load if steps 2 and 3 are validated	SyWay S2P Data Team
5	Validate few records loaded by accessing standard transactions from S/4HNA eg. MM03	SyWay S2P Data Team
6	Generate post load report if step 5 is validated	SyWay S2P Data Team

Load Phase and Dependencies

Identify the phase as to “when” the load for this object will occur. <Pre-Cutover, Cutover, Post Cutover> and list the steps that need to occur before the load can commence

Configuration

List the Configurations required before loading can commence

Item #	Configuration Item

Conversion Objects

Object #	Preceding Object Conversion Approach
	list the exact title of the conversion object of only the immediate predecessor – this will then confirm the DDD (Data Dependency Diagram)

Error Handling

The table below depicts some possible system errors for this data object during data load. All data load error is to be logged as defect and managed within the Defect Management

Error Type	Error Description	Action Taken

Post-Load Validation

Project Team

The following post-load validations will be performed by the Project Team.

Completeness

Task	Action
Verify Count	SyWay S2P Data Team to verify the record count created in target S/4 HANA by accessing post load reports in dspMigrate or standard reports from S/4 HANA.

Accuracy

Task	Action
Verify Logs	Check if there is data that failed to load and perform the necessary actions (e.g. register as post load issue or attempt to load the record again, etc.).

Business

The following post-load validations will be performed by the business.

Completeness

Task	Action
Verify Count	Download Post Load Reports from dspMigrate and verify that the record count loaded in the target S/4 HANA is the same count as of the endorsed load file.

Accuracy

Task	Action
Conversion Accuracy	Verify that the Material data in target S/4 HANA were loaded correctly via dspMigrate post load reports or standard reports from S/4 HANA.

Key Assumptions

• Master Data Standard is up to date as on the date of documenting this conversion approach and data load.
• Materials - Classification and Characteristic Assignment is in scope based on data design and any exception requested by business.

Any additional key assumptions.

See also

Insert links and references to other documents which are relevant when trying to understand this decision and its implications. Other decisions are often impacted, so it's good to list them here with links. Attachments are also possible but dangerous as they are static documents and not updated by their authors.

Change log

Workflow history