Purpose

This position paper presents Syensqo’s strategic vision to harmonize its Transport Management (TM) landscape by consolidating multiple fragmented freight collaboration tools into a single, globally integrated solution. The goal is to streamline operations, enhance carrier collaboration, event tracking and Freight Invoicing.

Vision

The simplification of the multiple fragmented and not integrated freight tools to one Global integrated platform.

Scope

The scope of this initiative covers the transition from several regional and mode-specific TM tools to one unified platform. Specifically, it includes:

• Replacing Transwide (Europe) with BN4L, providing global coverage for all transport modes.
• Reducing scope of to road transport in the US and Canada only for SPP and P&C.
• Expanding BN4L to cover carrier collaboration for ocean and air for SPP and P&C in the US and Canada, and to provide global coverage for all modes, including regions currently not integrated with any collaboration tool.
• Harmonizing middleware from four separate systems to a single middleware (CPI), simplifying integration and data management.

As-Is Landscape

Analysis: As shown in the Diagram and table above,  the Carrier Collaboration, TMS activities and Freight incaving are very fragmented with Transwide serving Europe only for one GBU and BluJay serving only USA &Canada for all GBUs but CASS does invoicing in US& Canada only for two GBUs

To- Be Landscape

Analysis: As shown in the Diagram and table above,  the Carrier Collaboration, TMS activities and Freight incaving are consolidated into one Global Platform BN4L, with the only exception of TMS4S and CASS being used for 2 GBUs in USA & Canada. Additional the middleware would be harmonized to SAP Integration Suite. 

• Carrier Collaboration:

The Following Functionalities are covered as part of Carrier Collaboration

1. 1. Transport Booking
   2. Carrier confirmation/ rejection
   3. Slot Booking

SAP BN4L will will be the Global Primary Solution for Carrier Collaboration in SyWay to-be Landscape for all modes of transport and for all GBUs.

The Only exception to this is that TMS4S will be used for  Performance & Care, Specialty Polymers in the region of USA & Canada. The decision to keep TMS4S (the upgraded version of BluJay) active in the future landscape for two GBUs was made to ensure business continuity. This decision was reached after a detailed analysis conducted in collaboration with business users

Note: Composites will use BN4L globally, including in the USA and Canada. In the current state ("As-Is"), CM was connected to BluJay; however, it was never used productively.

Current State (As-Is)

• • • • Carrier Collaboration is fragmented:

        • Europe: Uses Transwide

        • US & Canada: Uses BluJay

        • Rest of the World: No dedicated application for Carrier Collaboration

Future State (To-Be)

• • • • Carrier Collaboration will be harmonized with a single global application (BN4L) for all modes and regions, except:

        • USA & Canada: TMS4S will be retained for road mode in two GBUs

      • There is potential to sunset TMS4S once BN4L is stabilized and fully operational in other regions after Go-Live.

Key Benefits

• • • • Complete harmonization of Carrier Collaboration and freight invoicing processes globally

      • Streamlined operations and reduced system complexity

      • Middleware simplification and standardization  from four middlewares to One middleware (CPI)

• Track and Trace:

The Following Functionalities are covered as part of Track and Trace

1. 1. Milestone tracking of event after truck/rail/vessel during transit e.g.. departure, arrival , delay , damage etc. 

For Ocean(FCL) the track and trace will be done via Movement by project44, which is the same as the As-Is scenario. However the key change here currently P44 is directly integrate to the SAP ECC system, however in Future state it will be connected to BN4L and BN4L will in turn send the track and trace data to S/4 HANA, making it seamless connectivity with one application BN4L 

For All other modes of transport Globally the track can trace will be done via BN4L directly, i.e. Carrier can Log events via BN4L web portal. Exception: for Road Mode of transport in USA & Canada for Performance & Care, Specialty Polymers will be done via TMS4S

Note: BN4L can also directly connect with Carrier via EDI or API. Any such requirement of direct connect between Carrier system and BN4L will be assessed as part of the Carrier onboarding activity. 

• External TMS:

The Following Functionalities are covered by External TMS application:

1. 1. Carrier Selection
   2. Carrier Collaboration
   3. Freight Charge Calculation
   4. Track and Trace

For USA and Canada, road mode, USA & Canada for Performance & Care, Specialty Polymers, TMS4S system will be used as External TMS system. SAP S/4HANA TM will be integrated to TMS4S. TMS4S will be responsible for Carrier selection, Confirmation, Charge Calculation and track and track trace and send the information to SAP S/ HANA TM.

For All other modes of transports Globally, SAP S/HANA TM will be used to do Carrier selection and Freight Charge Calculation with Carrier Collaboration and Track and trace done as explained the above two sections.

• Freight Audit & Invoicing:

The Following Functionalities are covered as part of Freight Audit & Invoicing:

1. 1. Audit of Freight calculated planned freight charges
   2. Payment of Freight Invoices to Carrier

For USA and Canada, road mode, USA & Canada for Performance & Care, Specialty Polymers, CASS will be used for Freight Audit & Invoicing.

For All modes of transport, globally, SAP TM along with BN4L will be used to handle dispute management ensuring that the Planned Freight is audited and aligned with the Carrier.

Generating Freight Invoice:

Primary Methd: Carrier should generate invoicing directly via BN4L portal

Secondary method: In case of exceptions ( e.g. carrier not onboarded on BN4L), Carrier can send the invoice to VIM.

• Container Tracking:

Ovinto is used in French Plant of Taveau for tracking container movements and tracking the inventory of empty, preload containers. It is planned to retain the application only for the Taveau plant.

• Site Logistics:

The Following Functionalities are covered as part of Site Logistics:

1. 1. Post Check-in / Check-out to S/4 HANA TM
   2. Send Truck, Driver details to S/4 HANA TM

Selfy will be used as a Primary Application for site Logistics. Currently Selfy is used in 3 Plants in Europe (Ospiate Italy, Mereville France, Spinetta Italy) . Selfy will be integrated with the new S/4 HANA system as part of the SyWay to be state.

Simba/Focusol is used as the Site Logistics application in Taveau France instead of Selfy. Simba/Focusol will be integrated with the new S/4 HANA system as part of SyWay for Taveau Plant. 

• Rail Tracking:

Bourque is used as a Rail Tracking application in USA. It is not integrated to the current SAP ECC system and in Future state as well it will remain standalone and not integrated with new S/4 HANA system. 

Abbreviations

Conclusion

Syensqo’s commitment to harmonizing its TM landscape through the adoption of BN4L and a single middleware platform marks a significant step toward operational excellence. This initiative will deliver improved efficiency, visibility, and Carrier collaboration