Status	Approved
Owner	BUOSI-ext, Angelo HANCOCK-ext, John CLARKE-ext, Steve
Stakeholders

Purpose

The purpose of this document is to define the conversion approach to upload Materials - Classification and Characteristic Assignment in S/4 HANA as part of the Material Data Migration.

Link to MDS: DD-FUN-050 Master Data Standard_2023-Materials - Classification and Characteristic Assignment

Conversion Scope

The scope of this document covers the approach for converting active Values data, linked to Materials and Characteristics of Class Type 001, from Legacy Source Systems into S/4HANA following the Material Master Data Design Standard.

This object is migrated after Material Basic Data, therefore only materials in scope for the object "2019 - Materials Basic Data View" are in scope for this object. Click here to go to the Conversion Spec for 2019 to see the full set of relevancy rules.

List of source systems and approximate number of records ***************

Source	Scope	Source Approx No. of Records	Target System	Target Approx No. of Records
DCT	Linking Materials (2019 - Materials Basic Data View) to Classes (2017 Material - Class Type 001)	Materials: 260,000 Classes: 4 As per Material relevancy criteria	S4H	197,141 This will change based on the Material Deduplication Process
DCT	Linking Classes to Characteristics (2018 Materials - Characteristics of Class Type 001)	Classes: 4 Characteristics: 41	S4H	164 **** **** Need info
DCT	Materials & Characteristics to Values assignment	Materials: 260,000 Characteristics: 39 This will change based on the Material Deduplication Process	S4H	10.14 Million
PF2 & WP2	Materials & Characteristics to Values assignment specifically for: Characteristics: Z_SY_MAT_OLD_PART_NUMBER & Z_SY_MAT_OLD_PART_DESCRIPTION Values: MARA-MATNR & MAKT-MAKTX, as well as the BAAN info.	Materials: 260,000 Characteristics: 2 This will change based on the Material Deduplication Process	S4H	520,000 This will change based on the Material Deduplication Process

Predecessor Object

2017 Materials - Class Type 001 → 2018 Materials - Characteristics of Class Type 001 → 2023 Materials - Classification and Characteristic Assignment.
2019 Materials - Basic Data View ↗

Additional Information

Multi-language Requirement

Not Applicable

Document Management

Not Applicable

Legal Requirement

Not Applicable

Special Requirements

Not Applicable

Target Design

As per MDS. This is for reference, see below for the actual requirement.

Table	Field	Field Description	Data Type	Length	Requirement
MARA	MATNR	Material Number	CHAR	18	Required
KLAH	KLART	Class type	CHAR	3	Required
KLAH	CLASS	Class	CHAR	18	Required
KSSK	STDCL	Indicator: Standard Class	CHAR	1	System
KSSK	STATU	Classification status	CHAR	1	System
KSSK	ZAEHL	Sort position	INT2	5	System
CABNT	ATBEZ	Characteristic Description	CHAR	30	System
AUSP	ATWRT	Characteristic Value	-	-	Required

The technical design of the target for this conversion approach.

Table	Field	Field Description	Data Type	Length	Requirement	Temp
MARA	MATNR	Material Number	CHAR	18	Required
MARA	MTART	Material Type	CHAR	4	Required
Table	Field	Field Description	Data Type	Length	Requirement	Temp
KLAH	CLINT	Internal Class Number	NUMC	10	Required
KLAH	CLASS	Class Name	CHAR	18	Required
Table	Field	Field Description	Data Type	Length	Requirement	Temp
CABN	ATINN	Internal Characteristic	NUMC	10	Required
CABN	ATNAM	Characteristic Name	CHAR	30	Required
Table	Field	Field Description	Data Type	Length	Requirement	Temp
CAWN	ATINN	Internal characteristic	NUMC	10	Required
CAWN	ATZHL	Int Counter	NUMC	4	Required
CAWN	ATWRT	Value	CHAR	70	Required
CAWN	ATSTD	Default Value	CHAR	1	Conditional
Table	Field	Field Description	Data Type	Length	Requirement	Temp
KSML	CLINT	Internal Class Number	NUMC	10	Required
KSML	POSNR	Item Number	NUMC	3	Required
KSML	IMERK	Internal Characteristic	NUMC	10	Required
KSML	KLART	Class Type	CHAR	3	Required
Table	Field	Field Description	Data Type	Length	Requirement	Temp
KSSK	OBJEK	Key of Object to be Classified	CHAR	90	Required
KSSK	MAFID	Indicator: Object/Class	CHAR	1	Required	Default to "O"
KSSK	KLART	Class Type	CHAR	3	Required
KSSK	CLINT	Internal Class Number	NUMC	10	Required
KSSK	STDCL	Indicator: Standard Class	CHAR	1	System
KSSK	STATU	Classification Status	CHAR	1	System
KSSK	ZAEHL	Sort Position	INT2	5	System
Table	Field	Field Description	Data Type	Length	Requirement	Temp
AUSP	OBJEK	Key of Object to be Classified	CHAR	90	Required
AUSP	ATINN	Internal Characteristic	NUMC	10	Required
AUSP	ATZHL	Characteristic Value Counter	NUMC	3	Required	Default to 1
AUSP	MAFID	Indicator: Object/Class	CHAR	1	Required	Default to "O"
AUSP	KLART	Class Type	CHAR	3	Required
AUSP	ATWRT	Characteristic Value	CHAR	70	Required

Data Cleansing

ID	Criticality	Error Message/Report Description	Rule	Output	Source System
		Not Applicable

Conversion Process

The high-level process is represented by the diagram below: ***************

Field Governance Rules
These governance rules apply to the individual fields within the data record.
Rule #	Field Label	Rule Description	Validation Method	Conditional Logic	Cleansing Rule (Also see Data Cleansing section above)
		Not Applicable

Data Privacy and Sensitivity

Not Applicable

Extraction

The source for Classes to Characteristics is a Load-File/DCT (see below in the DCT section for more details).

The source for Materials to Classes is a Load-File/DCT (see below in the DCT section for more details) and is based on a mapping of Material Type to Class.

For Materials & Characteristics to Values, the source is a DCT****************.

The source for Materials & Characteristics to Values assignment specifically for Old Material Number and Description is PF2 & WP2

Where applicable above, the source for Materials is PF2 & WP2. This will be extracted by Syniti and the Relevancy criteria, as specified in object "2019 - Materials Basic Data View", applied to identify the records that are applicable for the Target load.

Extraction Run Sheet

Req #	Requirement Description	Team Responsible
1	Extract data from source system based on relevancy rules.	Syniti
2	Extract data from the DCTs.	Syniti

Selection Screen

Selection Ref Screen	Parameter Name	Selection Type	Requirement	Value to be entered/set
Not Applicable

Data Collection Template (DCT)

Target Ready Data Collection Template will be created for Materials - Classification and Characteristic Assignment data with the fields requiring transformation as mentioned in the transformation rule.

DCT Rules for linking Materials to Classes:

Field Name	Field Description	Rule	Tool Tip
MARA-MTART	Material Type	Mandatory. Use drop-down based on (S4H) T134.	Key that groups materials, e.g. raw materials, finished products or trading goods.
KLAH-CLASS	Class Name	Mandatory.	Name used to uniquely identify a class within a class type.
KSSK-KLART	Class Type	Read-only. From KLAH-KLART.

DCT Rules for linking Classes to Characteristics:

Field Name	Field Description	Rule	Tool Tip	zComment	zDelete
KLAH-CLASS	Class Name	Mandatory.	Name used to uniquely identify a class within a class type.
CABN-ATNAM	Characteristic Name	Mandatory.	Unique technical name identifying the characteristic (e.g. LENGTH, COLOR).

DCT Rules for Materials & Characteristics to Values assignment:

Field Name	Field Description	Rule	Tool Tip
AUSP-OBJEK	Material Number	Mandatory. Based on MARA-MATNR	The Material Number will be used to identify the corresponding Target Material Number.
KLAH-CLASS	Class Name	Mandatory. Use drop-down based on KSSK.	Name used to uniquely identify a class within a class type.
AUSP-KLART	Class Type	Read-only. From KLAH-KLART.
CABN-ATNAM	Characteristic Name	Mandatory. Use drop-down based on KLAH-CLASS via KSSK to KSML.	Unique technical name identifying the characteristic (e.g. LENGTH, COLOR).
AUSP-ATWRT	Value	Required. ---------------------------------------------------------------------- When a new DCT record is shown and once KLAH-CLASS and CABN-ATNAM are selected, use default value of CAWN-ATWRT WHERE CAWN-ATSTD = 'X', else show a Blank. This is from KSML to CABN to CAWN. If the above cannot be done easily then leave it out. ---------------------------------------------------------------------- Use drop-down based on CAWN-ATWRT (Value) and CAWNT-ATWTB (Value Description) WHERE CAWNT-SPRAS='E'. This is from KSML to CABN to CAWN to CAWNT.	List of permissible predefined characteristic values (e.g. RED, BLUE, GREEN).

Extraction Dependencies

Item #	Step Description	Team Responsible
1	Data relevancy and deduplication of legacy Material data must be completed.	Syniti & S2P Data Team
2	As-Is to To-Be Material Type Mapping must be complete	S2P Data Team

Transformation

The Target fields are mapped to the applicable Legacy field that will be its source, this is a 3-way activity involving the Business, Functional team and Data team. This identifies the transformation activity required to allow Syniti ADMM to make the data Target ready:

Perform value mapping and data transformation rules.
1. Legacy values are mapped to the to-be values (this could include a default value)
2. Values are transformed according to the rules defined in ADMM.
Prepare target-ready data in the structure and format that is required for loading via prescribed Load Tool. This step also produces the load data ready for business to perform Pre-load Data Validation.

Transformation Run Sheet

Item #	Step Description	Team Responsible
1	Verify that Material data is extracted from both source systems.	Syniti / S2P Data Team
2	Verify that data has been loaded into the DCTs.	Syniti / S2P Data Team
3	Transformation jobs are ready for execution.	Syniti
4	Generate Load Files	Syniti

Transformation Rules

Transformation Rules for linking Materials to Classes:

Source system	Source Table	Source Field	Source Description	Target System	Target Table	Target Field	Target Description	Transformation Logic
PF2,WP2,DCT	MARA	MATNR	Material Number	S4H	KSSK	OBJEK	Key of Object to be Classified	WHERE ECC.MARA-MTART = DCT.MARA-MTART
				S4H	KSSK	MAFID	Indicator: Object/Class	Default to "O"
				S4H	KSSK	KLART	Class Type	Default to "001"
DCT	KLAH	CLASS	Class Name	S4H	KSSK	CLINT	Internal Class Number	Copy KLAH-CLINT
				S4H	KSSK	STDCL	Indicator: Standard Class	Default to "X"
				S4H	KSSK	STATU	Classification Status	Default to "1"
				S4H	KSSK	ZAEHL	Sort Position	Default to 10. If a material is assigned to a 2nd Class then default to 20.

Transformation Rules for linking Classes to Characteristics:

Source system	Source Table	Source Field	Source Description	Target System	Target Table	Target Field	Target Description	Transformation Logic
DCT	KLAH	CLASS	Class Name	S4H	KSML	CLINT	Internal Class Number	Copy KLAH-CLINT
				S4H	KSML	POSNR	Item Number	Integer counter starting at 1 and incrementing by 1 for each CLINT. When CLINT changes it starts from 1 again.
DCT	CABN	ATNAM	Characteristic Name	S4H	KSML	IMERK	Internal Characteristic	Copy CABN-ATINN
				S4H	KSML	KLART	Class Type	Default to "001"

Transformation Rules for Materials & Characteristics to Values assignment:

Source system	Target System	Target Table	Target Field	Target Description	Transformation Logic
DCT	S4H	AUSP	OBJEK	Key of Object to be Classified
	S4H	AUSP	ATINN	Internal Characteristic
	S4H	AUSP	ATZHL	Characteristic Value Counter	Default to 1
	S4H	AUSP	MAFID	Indicator: Object/Class	Default to "O"
	S4H	AUSP	KLART	Class Type
	S4H	AUSP	ATWRT	Characteristic Value

Transformation Rules for Materials & Characteristics to Values assignment for Old Material Number & Description:

Source system	Target System	Target Table	Target Field	Target Description	Transformation Logic
PF2 & WP2	S4H	AUSP	OBJEK	Key of Object to be Classified
	S4H	AUSP	ATINN	Internal Characteristic
	S4H	AUSP	ATZHL	Characteristic Value Counter	Default to 1
	S4H	AUSP	MAFID	Indicator: Object/Class	Default to "O"
	S4H	AUSP	KLART	Class Type
	S4H	AUSP	ATWRT	Characteristic Value

Transformation Mapping

Mapping Table Name	Mapping Table Description

Transformation Dependencies

List the steps that need to occur before transformation can commence

Item #	Step Description	Team Responsible
1	Ensure DCT tables completeness	SyWay S2P Data Team
2	Value Mappings are according to the latest design - <List of Value Mappings>	SyWay S2P Data Team

Pre-Load Validation

Project Team

Completeness

Task	Action
Verify Record Count	SyWay S2P Data Team to verify that the total number of relevant records from the DCT is equal to the total number of records in the Preload and Load Sheets.

Accuracy

Task

Action

Conversion Accuracy

SyWay S2P Data Team to verify that all fields below meet pass the checks:

Mandatory Fields
Field and Value Mapping Correctness
Null Checks
Text Length Checks

Review Error Reports

Review and correct the errors. Achieve a zero-error record count as much as possible. Raise defects for data remediated and requiring a correction in the source data.

Business

Completeness

Task	Action
Verify Record Count	Business Data Owner/s to verify that the total number of relevant records from the the DCT is equal to the total number of records in the Preload and Load Sheets.

Accuracy

Task	Action
Conversion Accuracy	Business Data Owner/s to verify that all the data in the load table/file is accurate as per endorsed transformation/mapping rules (and signed-off DCT data).

Load

The load process includes:

Execute the automated data load into target system using load tool or product the load file if the load must be done manually
Once the data is loaded to the target system, it will be extracted and prepared for Post Load Data Validation

Load Run Sheet

Item #	Step Description	Team Responsible
1	Go to <Load Tool>	SyWay S2P Data Team
2	Load 3 records for < > to validate if data is loaded successfully without errors	SyWay S2P Data Team
3	Load 3 records for < > to validate if data is loaded successfully without errors	SyWay S2P Data Team
4	Proceed with full load if steps 2 and 3 are validated	SyWay S2P Data Team
5	Validate few records loaded by accessing standard transactions from S/4HNA eg. MM03	SyWay S2P Data Team
6	Generate post load report if step 5 is validated	SyWay S2P Data Team

Load Phase and Dependencies

Configuration

Item #	Configuration Item

Conversion Objects

Object #	Preceding Object Conversion Approach
	list the exact title of the conversion object of only the immediate predecessor – this will then confirm the DDD (Data Dependency Diagram)

Error Handling

Error Type	Error Description	Action Taken

Post-Load Validation

Project Team

Completeness

Task	Action
Verify Count	SyWay S2P Data Team to verify the record count created in target S/4 HANA by accessing post load reports in dspMigrate or standard reports from S/4 HANA.

Accuracy

Task	Action
Verify Logs	Check if there is data that failed to load and perform the necessary actions (e.g. register as post load issue or attempt to load the record again, etc.).

Business

Completeness

Task	Action
Verify Count	Download Post Load Reports from dspMigrate and verify that the record count loaded in the target S/4 HANA is the same count as of the endorsed load file.

Accuracy

Task	Action
Conversion Accuracy	Verify that the Material data in target S/4 HANA were loaded correctly via dspMigrate post load reports or standard reports from S/4 HANA.

Key Assumptions

Master Data Standard is up to date as on the date of documenting this conversion approach and data load.
Materials - Classification and Characteristic Assignment is in scope based on data design and any exception requested by business.

Change log

Version	Published	Changed By	Comment
CURRENT (v. 13)	Feb 17, 2026 13:50	CLARKE-ext, Steve
v. 56	Feb 16, 2026 11:47	CLARKE-ext, Steve
v. 55	Feb 16, 2026 11:43	CLARKE-ext, Steve
v. 54	Feb 13, 2026 15:17	CLARKE-ext, Steve
v. 53	Feb 13, 2026 13:08	CLARKE-ext, Steve
v. 52	Feb 13, 2026 11:30	CLARKE-ext, Steve
v. 51	Feb 13, 2026 11:17	CLARKE-ext, Steve
v. 50	Feb 10, 2026 12:05	CLARKE-ext, Steve
v. 49	Feb 06, 2026 15:07	CLARKE-ext, Steve	Changes for CR0320
v. 48	Dec 10, 2025 14:22	CLARKE-ext, Steve

Go to Page History

Workflow history

Title	Last Updated By	Updated	Status
There are no pages at the moment.

Feb 19, 2026	Actor	Type	Activity	Version
Approved	HOLMES-ext, Richard	State	changed state to Approved at 12:58 pm	v57
Lead Approval	HOLMES-ext, Richard	State	gave POD Lead Review approval at 12:58 pm
	JAIN-ext, Gaurav	State	changed expiry date to '26 Feb, 2026 11:38 am' at 11:38 am
	JAIN-ext, Gaurav	State	changed state to Lead Approval at 11:38 am	v57
Tech Review	JAIN-ext, Gaurav	State	gave Syniti Team Review approval at 11:38 am
		State	changed expiry date to '24 Feb, 2026 11:38 am' at 11:38 am
		State	changed state to Tech Review at 11:38 am Changes for CR0320 are approved	v57
Pending adjustment	JAIN-ext, Gaurav	State	changed state to Pending adjustment at 11:37 am	v57

Workflow history

Space shortcuts

Page tree

CNV-2023 Materials - Classification and Characteristic Assignment

Purpose

Conversion Scope

Predecessor Object

Additional Information

Multi-language Requirement

Document Management

Legal Requirement

Special Requirements

Target Design

Data Cleansing

Conversion Process

Data Privacy and Sensitivity

Extraction

Extraction Run Sheet

Selection Screen

Data Collection Template (DCT)

Extraction Dependencies

Transformation

Transformation Run Sheet

Transformation Mapping

Transformation Dependencies

Pre-Load Validation

Project Team

Completeness

Accuracy

Business

Completeness

Accuracy

Load

Load Run Sheet

Configuration

Conversion Objects

Error Handling

Post-Load Validation

Project Team

Completeness

Accuracy

Business

Completeness

Accuracy

Key Assumptions

See also

Change log

Workflow history