In order to predict the mechanical behavior our the long glass fiber reinforced grades (XENCOR family) at part level and to take into account their specificities compared to more traditional short fiber reinforced compounds, a dedicated MOLDFLOW-DIGIMAT-ABAQUS methodology has been defined and implemented from the DIGIMAT material calibration to the application on final application parts.
The work accomplished regarding this topic is summarized in the following documents:
- Document 1: for in-depth understanding of the key aspects to be considered during the DIGIMAT material calibration with an insight about MOLDFLOW capabilities in terms of fiber orientation prediction;
- Document 2: for the application and validation on a structural demonstrator part
Moreover, for some specific customer requests involving impact/crash tests, an approached method has been implemented to mimic the higher resistance to failure propagation observed with the XENCOR grades compared to short fiber reinforced polymers. The related information can be found here.
In addition to these studies, it is also relevant to assess the influence of a part and feeding system (sprue, runners and gate design/size ...) on the residual fiber length that we should expect in the final application. Therefore, a procedure to include the fiber breakage during our injection molding simulation (MOLDFLOW- has been written and is available here.