Linearity
Created Jun 24, 2019 (14:23)
by Vidhyadharan-ext, Vaishna , last modified Aug 18, 2023 (13:16)
by GUENNOUNI, Nathalie
Definition
ISO 5725: La linéarité est la capacité d'une méthode d'analyse, à l'interieur d'un intervalle, à fournir une réponse proportionnelle à la quantité en analyte à doser dans l'échantillon pour le laboratoire.
Linearity
Created Jun 24, 2019 (14:23)
by Vidhyadharan-ext, Vaishna , last modified Aug 18, 2023 (13:16)
by GUENNOUNI, Nathalie
Definition
ICH: It is the ability (within a given range) to obtain test results which are directly proportional to the concentration (amount) of analyte in the sample.
MSA: The correlation multiple and independent bias errors over the operating range. A system error component of the measurement system. The difference of bias throughout the espected operating (measurement) range of the equipment.
Lower Control Limit
Created Jun 14, 2019 (05:52)
by Vidhyadharan-ext, Vaishna
Definition
6 sigma: The Lower Control Limit (LCL) is a limit in the Control Chart that is set below the centerline, typically at -3 standard deviations, in order to determine whether or not the process is in control.
Lower Specification Limit
Created Jun 14, 2019 (05:53)
by Vidhyadharan-ext, Vaishna
Definition
6 sigma: A Lower Specification Limit (LSL) is the lower limit of a tolerance range specified by a customer requirement. A measured value that is below this limit is considered a defect
This page has no comments.