Principle

Application of a shear rate range (in steady mode) or a strain frequency (in dynamic mode) and measurement of the correspondent resistance of the material to flow to determine viscosity and viscoelastic properties (𝜂*, G’, G” and tan𝛿) respectively.

Capabilities

  • Measurement of viscosity in a wide range of shear rates (0.01 - 1000 s-1) and temperatures.
  • Frequency sweep tests for viscoelastic materials.
  • Time sweep test to evaluate stability.
  • Temperature sweep test for screening crosslinking temperature, gelation point, …
  • Dynamic Mechanical Analyses (DMA) for phase transitions and modulus variation with temperature.

Assets


AssetDetails

RFS III Rheometrics

Strain controlled rheometer with high sensitivity for low viscosities.

Geometries: parallel plates, cone & plate, concentric cylinders.

Temperatures: -20 to +60 °C.

RMS 800

Strain controlled rheometer to measure viscoelasticity of polymer melts

Geometries: parallel plates.

T from +30 to +400 °C.

Anton Paar MCR502

Stress controlled rheometer for steady and dynamic measures from fluids to polymer melts.

Geometries: parallel plates, cone & plate, concentric cylinders.

Dynamic Mechanical Analysis with torsional geometry.

T from -150 to +500 °C.

Ares Rheometrics

Strain controlled rheometer for steady and dynamic measures from fluids to polymer melts.

Geometries: parallel plates, cone & plate, concentric cylinders.

Dynamic Mechanical Analysis with torsional geometry.

T from -150 to +400 °C.



back to Rheology and Physical Lab Home

  • No labels