Syensqo IS - Customer Support

Page tree

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Useful links : 

(star)  Link to Zebra Site 

(star)  Presentation - Label/printers


1.What is the printer's specification ? 


Printer

Thermal transfer, in order to use less sensitive label to moisture, temperature and chemicals

Zebra ZD421T, 8 points/mm (203 dpi), RTC, USB, BT (BLE), Ethernet, thermal transfer

print width (max.); 104 mm

Ribbon 

The size of the ribbon should on line with the label size

ref: Resin 5095

Label

Quality Z-Ultimate 3000T 

size: setting will be set for the 60 mm* 30 mm

Special 45*15 mm will be prepared



2.What are the steps to install the printer ? 


  1. Choose the right place for the printer with ethernet access
  2. Ask for an activation of the plug if not => ask on Service one / ISSC (cf list in slide)
  3. Installation of ribbons/labels (pictures inside printer) and different guides
  4. Print test (to see if anything is to adjust) 
  5. Fix the IP address => ask Service one to create a FIX address
  6. Project team enters IP address into LIMS and adjust settings on servers

      

3.How to print a Label in Agilab OneLims ? 


    • You can select on this list the fractions you want to print, and click on "Print Label" 

    • You will have a pop up that appears, you will be able to select : 
      • The name of the printer you want to choose (of your default location) : ex Bristol ZD420
      • Choose the label (only label linked to the former printer are reachable)
      • Select the number of the copies
      • Click on the buttom Print


The best way to get IT support is to use the new Service One Platform.