Status	Approved
Owner	PUN-ext, Eddy
Stakeholders

Purpose

The purpose of this document is to define the conversion approach to create Measuring Point in S/4 HANA.

Conversion Scope

The scope of this document covers the approach for converting active Measuring Point from Legacy Source Systems into S/4HANA following the Measuring Point Master Data Design Standard.

TO CONFIRM if there are any classification assigned to Measuring Point once MDS is final

The data from legacy system includes:

All active Measuring Points linked to active Functional Locations
All active Measuring Points linked to active Equipment

For the above list, there should be at least 1 Measurement Document created within the last 1 year.

TO CONFIRM - what are the Meas Point Categories to be migrated in the legacy

The data from legacy system excludes:

Measuring Points which are inactive / flagged for deletion

List of source systems and approximate number of records

Source	Scope	Source Approx No. of Records	Target System	Target Approx No. of Records
PF2, WP2	Measuring Points will be extracted from PF1 and WP1	6000	S/4HANA	6000
DCT	Measuring points for plants which do not have data existing from PF2 and PF2	nnn	S/4HANA	nnn

Additional Information

Multi-language Requirement

Measuring point object does not have multi language support. Description will be made available in the language required by the respective plant using EN logon.

Document Management

N/A

Legal Requirement

N/A

Special Requirements

N/A

Target Design

The technical design of the target for this conversion approach.

Table	Field	Data Element	Field Description	Data Type	Length	Requirement

Data Cleansing

ID	Criticality	Error Message/Report Description	Rule	Output	Source System
1012-001	C1	Missing Measuring Point Description	Measuring Point as per Relevancy Criteria where there are blank Measuring Point Descriptions.	Measuring Point, Description	PF2, WP2
1012-002	C2	Measuring Point as per Relevancy Criteria which contain [Informal Words] in the Maintenance Plan Description	Measuring Point Descriptions with Informal Words	Measuring Point, Description	PF2, WP2
1012-003	C1	Invalid or Inactive Equipment or Functional Location linked to Measuring Point	Measuring Point as per Relevancy Criteria assigned with an Equipment / Functional which does not belong below: 1. Equipment as per Relevancy Criteria 2. Functional Location as per Relevancy Criteria	Measuring Point, FL, FL Status, EQ, EQ Status	PF2, WP2
1012-004	C1	Invalid or Inactive Catalog Code Groups & Code linked to Measuring Point	Measuring Point as per Relevancy Criteria assigned with a Catalog Code Groups & Code which does not belong below: 1. Catalog Code Groups & Codes as per Relevancy Criteria	Measuring Point, Catalog Code Group, Catalog Code	PF2, WP2
1012-005	C1	Invalid or Inactive Construction Type linked to Measuring Point	Measuring Point as per Relevancy Criteria assigned with a Construction Type which does not belong below: 1. Construction Type as per Relevancy Criteria	Measuring Point, Construction Type	PF2, WP2
1012-006	C1	Invalid or Inactive Characteristic linked to Measuring Point	Measuring Point as per Relevancy Criteria assigned with a Characteristic which does not belong below: 1. Characteristic as per Relevancy Criteria	Measuring Point, Characteristic	PF2, WP2
1012-007	C1	Invalid or Inactive Class linked to Measuring Point	Measuring Point as per Relevancy Criteria assigned with a Class which does not belong below: 1. Class as per Relevancy Criteria	Measuring Point, Class	PF2, WP2
1012-008	C1	Invalid or Inactive Production Resources & Tool linked to Measuring Point	Measuring Point as per Relevancy Criteria assigned with a Production Resources & Tool which does not belong below: 1. Production Resources & Tool as per Relevancy Criteria	Measuring Point, PRT	PF2, WP2
1012-009	C1	Invalid, Inactive or no Maintenance Plans linked to Measuring Point	Measuring Point as per Relevancy Criteria with no Maintenance Plan Linked or with a Maintenance Plan which does not belong below: 1. Maintenance Plan as per Relevancy Criteria	Measuring Point, Maintenance Plan, Maintenance Plan Status	PF2, WP2
1012-010	C3	Duplicate Measuring Point by same Technical Object, Position, Description, Char and Type	Measuring Point as per Relevancy Criteria where there is more than one Technical Object + Position + Description + Char + Type Combination. > double check with MDS	Measuring Point, FL, EQ, Position, Description, Characteristics, Type	PF2, WP2
1012-011	C1	Measuring Point Technical object authorization group incorrect.	Measuring Point as per Relevancy Criteria with Invalid Authorization Group (T370F)	Measuring Point, Authorisation Group	PF2, WP2
1012-012	C1	Measuring Point UOM Missing / incorrect.	Measuring Point as per Relevancy Criteria with no UoM Assigned or Invalid UoM (T006)	Measuring Point, UOM	PF2, WP2
1012-013	C2	Measuring Point which with latest Measurement Document that is older than 1 year	Retrieve the latest Measurement Document of the Measuring Point and list down all the Measuring points where the Measurement Document is older than 1 year	Measuring Point, FL / EQ, Description, Measurement Document, Measurement Document Date	PF2, WP2

Informal Words **

*DNU	Delete	donot	Formerly	Old #
..	Deletion	DONT USE	From	Old[ ]
/	DELISTED	DON'T USE	Incorrect	PLEASE USE
?	Discontinued	Dup Use	Invalid	Pls Use
@	Disposable	DUPLICATE	New	Previously
^	DNU	-DUPLICATE	NOT ACTIVE	Replace
+	Do Not	DUPLICATION	not in use	Replaced
++	Do Not Re	Duplicidad	Not Used	RESERVED
£	Do Not Sell	Duplikat	NOT VALID	Retired
Defective	Do Not Use	Former	Obsolete	ZZDEL

Conversion Process

The high-level process is represented by the diagrams below.

The following represents the high-level process for Source System Extraction:

The following represents the high-level process for DCT:

Data Privacy and Sensitivity

Extraction

Extract data from a source into . There are 2 possibilities:

The data exists. connects to the source and loads the data into . There are 3 methods:
1. Perform full data extraction from relevant tables in the source system(s).
2. Perform extraction through the application layer.
3. Only if ; cannot connect to the source, data is loaded to the repository from the provided source system extract/report.
The data does not exist (or cannot be converted from its current state). The data is manually collected by the business directly in . This is to be conducted using DCT (Data Collection Template) in

The agreed Relevancy criteria is applied to the extracted records to identify the records that are applicable for the Target loads

Extraction Run Sheet

Req #	Requirement Description	Team Responsible
1	Extract data from source system based on relevancy rule	Data Team
2	Google Sheet report pre-populated with PF2 and WP2 information to be generated based on relevancy criteria.	Data Team

Selection Screen

Selection Ref Screen	Parameter Name	Selection Type	Requirement	Value to be entered/set
N/A

Data Collection Template (DCT)

Target Ready Data Collection Template will be created for Measuring Point data with exception of some fields which require transformation as mentioned in the transformation rule.

DCT Rules

Field Name	Field Description	Rule

Extraction Dependencies

Item #	Step Description	Team Responsible
1	Functional Location and Equipment Data need to be extracted first with their respective relevancy rules applied before measuring point data can be extracted referencing to the relevant Functional Location and Equipment.	Data Team

Transformation

The Target fields are mapped to the applicable Legacy field that will be its source, this is a 3-way activity involving the Business, Functional team and Data team. This identifies the transformation activity required to allow to make the data Target ready:

Perform value mapping and data transformation rules.
1. Legacy values are mapped to the to-be values (this could include a default value)
2. Values are transformed according to the rules defined in
Prepare target-ready data in the structure and format that is required for loading via prescribed Load Tool. This step also produces the load data ready for business to perform Pre-load Data Validation

Transformation Run Sheet

Item #	Step Description	Team Responsible

Transformation Rules

Rule #	Source system	Source Table	Source Field	Source Description	Target System	Target Table	Target Field	Target Description	Transformation Logic

Transformation Mapping

Mapping Table Name	Mapping Table Description
Characteristic Name	Characteristic Name XREF mapping table
Measuring Point	Legacy Measuring Point XREF mapping table
Code Group	Code Group mapping table
Functional Location and Equipment	Legacy Functional Location and Equipment XREF mapping table
Equipment	Legacy Equipment XREF mapping table

Transformation Dependencies

List the steps that need to occur before transformation can commence

Item #	Step Description	Team Responsible

Pre-Load Validation

Project Team

Completeness

Task	Action
Verify Record Count	Data team to verify that the total number of relevant records from the source systems is equal to the total number of records in the Preload and Load Sheets.

Accuracy

Task

Action

Conversion Accuracy

Data team to verify that all fields below meet pass the checks:

1. Mandatory Fields

2. Field and Value Mapping Correctness

3. Null Checks

4. Text Length Checks

Review error reports

Review and correct the errors. Achieve a zero-error record count as much as possible. Raise defects for data remediated and requiring a correction in the source data.

Business

Completeness

Task	Action
Verify Record Count	Business team to verify that the total number of relevant records from the source systems is equal to the total number of records in the Preload and Load Sheets.

Accuracy

Task	Action
Conversion Accuracy	Business to verify that all the data in the load table/file is accurate as per endorsed transformation/mapping rules (and signed-off data)

Load

The load process includes:

Execute the automated data load into target system using load tool or product the load file if the load must be done manually
Once the data is loaded to the target system, it will be extracted and prepared for Post Load Data Validation

Sequence of load:

All Measuring points are created with no transfer reading.
After the Measuring Points are loaded successfully then the Measuring Point transfer reading is loaded.

Measuring point without transfer reading need to be loaded before measuring point with transfer reading.

For Legacy measuring point, XREF table generated from the first load for measuring point without transfer reading need to be used in the second load to transform the legacy measuring point to the SyWAY measuring point number for transfer reading.

Load Run Sheet

Item #	Step Description	Team Responsible

Load Phase and Dependencies

Pre-Cutover

Configuration

Item #	Configuration Item
1	Measuring point category
2	Measuring point characteristic
3	Measuring point catalog and code group

Conversion Objects

Object #	Preceding Object Conversion Approach
1003	Functional Location
1002	Equipment

Error Handling

Error Type	Error Description	Action Taken
Configuration	Invalid measuring point category	Engage Functional team to expedite and fix the error in the system
Configuration	Invalid measuring point characteristic	Engage Functional team to expedite and fix the error in the system
Configuration	Invalid measuring point code group	Engage Functional team to expedite and fix the error in the system
Invalid Data	Invalid Functional Location	Expedite whether the master data is available in the system
Invalid Data	Invalid Equipment	Expedite whether the master data is available in the system

Post-Load Validation

Project Team

Completeness

Task	Action
Verify Count	Data team to verify the record count created in target S/4 HANA by accessing post load reports in dspMigrate or standard reports from S/4 HANA.
Verify Logs	Check if there is data that failed to load and perform the necessary actions (e.g. register as post load issue, or attempt to load the record again, etc.).

Accuracy

Task	Action
Conversion Accuracy	Data team to verify that the Measuring Point data in target S/4 HANA were loaded correctly via dspMigrate post load reports or standard reports from S/4 HANA.

Business

Completeness

Task	Action
Verify Count	Download Post Load Reports from dspMigrate and verify that the record count loaded in the target S/4 HANA is the same count as of the endorsed load file.

Accuracy

Task	Action
Conversion Accuracy	Verify that the Measuring Point data in target S/4 HANA were loaded correctly via dspMigrate post load reports or standard reports from S/4 HANA.

Key Assumptions

Master Data Standard is up to date as on the date of documenting this conversion approach and data load.
Measuring Point is in scope based on data design and any exception requested by business.
Mapping values for characteristic and code group must be available for direct transform of legacy measuring point to new measuring point.

Change log

Version	Published	Changed By	Comment
CURRENT (v. 8)	Apr 06, 2026 15:52	PUN-ext, Eddy	CR0438 - Active (JEST-INAC <> 'X')
v. 128	Feb 12, 2026 11:24	PUN-ext, Eddy
v. 127	Jan 22, 2026 09:57	PUN-ext, Eddy
v. 126	Jan 21, 2026 12:55	PUN-ext, Eddy
v. 125	Jan 13, 2026 15:16	PUN-ext, Eddy
v. 124	Dec 12, 2025 14:06	PUN-ext, Eddy
v. 123	Dec 12, 2025 14:00	PUN-ext, Eddy
v. 122	Dec 10, 2025 15:11	PUN-ext, Eddy
v. 121	Dec 10, 2025 15:10	PUN-ext, Eddy
v. 120	Dec 10, 2025 15:09	PUN-ext, Eddy

Go to Page History

Workflow history

Title	Last Updated By	Updated	Status
There are no pages at the moment.

Apr 28, 2026	Actor	Type	Activity	Version
Approved	TAN-ext, Charmaine	State	changed state to Approved at 7:37 am (State override) [PMO Comments] Conversion Spec completed as per CS register and functional review completed	v129
Lead Approval	TAN-ext, Charmaine	State	gave Minor change approval at 7:37 am [PMO Comments] Conversion Spec completed as per CS register and functional review completed
Apr 15, 2026
	MOUSSA-ext, Eva	State	changed expiry date to '22 Apr, 2026 12:04 am' at 12:04 am
	MOUSSA-ext, Eva	State	changed state to Lead Approval at 12:04 am	v129
Tech Review	MOUSSA-ext, Eva	State	gave Syniti Team Review approval at 12:04 am v. 129 CR0438 approved
		State	changed expiry date to '20 Apr, 2026 12:04 am' at 12:04 am
		State	changed state to Tech Review at 12:04 am	v129
Pending adjustment	MOUSSA-ext, Eva	State	changed state to Pending adjustment at 12:04 am	v129

Workflow history

Space shortcuts

Page tree

CNV-1012 Measuring Point

Purpose

Conversion Scope

Additional Information

Multi-language Requirement

Document Management

Legal Requirement

Special Requirements

Target Design

Data Cleansing

Conversion Process

Data Privacy and Sensitivity

Extraction

Extraction Run Sheet

Selection Screen

Data Collection Template (DCT)

Extraction Dependencies

Transformation

Transformation Run Sheet

Transformation Mapping

Transformation Dependencies

Pre-Load Validation

Project Team

Completeness

Accuracy

Business

Completeness

Accuracy

Load

Load Run Sheet

Configuration

Conversion Objects

Error Handling

Post-Load Validation

Project Team

Completeness

Accuracy

Business

Completeness

Accuracy

Key Assumptions

See also

Change log

Workflow history