Status	Approved
Owner	HANCOCK-ext, John CLARKE-ext, Steve
Stakeholders

Purpose

The purpose of this document is to define the conversion approach to upload Materials - Class Type 001 into S/4 HANA as part of the Material Data Migration.

Link to MDS: DD-FUN-050 Master Data Standard_2017-Material master - Class Type 001

Conversion Scope

The scope of this document covers the approach for converting active Class data linked to Class Type 001 from Legacy Source Systems into S/4HANA following the Material Master Data Design Standard.

This object is migrated after Material Basic Data, therefore only materials in scope for object "2019 - Materials Basic Data View" are in scope for this object. Click here to go to the Conversion Spec for 2019 to see the full set of relevancy rules.

List of source systems and approximate number of records

Source

Scope

Source Approx No. of Records

Target System

Target Approx

No. of Records

PF2,WP2

Scope is Classes that fall under CLASS TYPE 001, are linked to Material records that have been identified as part of Basic Data and have descriptions in a language this is in the Core or Additional list.

Service Master records that will become Materials in the target are out of scope. See the mail from Simran. Service Master Data Used in 2017 CLASS TYPE 001 in S4H.pdf

WP2: 22,838 (3,000**)

PF2: 5,167 (6**)

** linked to relevant materials

S4H

28,005 (3,006**)

** linked to relevant materials

Jira Task to track the Classes that will be added to CLASS TYPE 001: PDM-770 - Getting issue details... STATUS

Configuration Document containing the above classes: <To Be Add>

Profiling

Legacy System	Total Relevant Materials	Relevant Materials assigned to Classes
PF2	104,484	4,224
WP2	72,378	25,866

Top 30 Classes by Legacy system

Legacy System	CLASS	Material Count
PF2	Z_MAT_PL_ARCH	3,202
	SPARE_PARTS_TC	989
	Z_ORTEMS	6
	DANGEROUS_GOOD	7
	Z_SAD_MM	7
	Z68-42169	1
WP2	Z_CM_MAT	6,043
	LIP0020148	3,447
	M001	2,898
	Z_MAT_PL_ARCH	2,088
	MATERIAL_SEGMENTS	935
	LIP0034040	842
	Z_MAT_ADDITIONAL	456
	Z_MAT_CRIT	418
	LIP0008485	343
	CRIT_IND	333
	LIP0007716	226
	LIP0031355	210
	LIP0032812	120
	LIP0034030	94
	LIP0032484	82
	LIP0008484	81
	LIP0032488	78
	LIP0031345	69
	LIP0034571	69
	LIP0008411	68
	LIP0034568	61
	LIP0008367	60
	LIP0034050	60
	M002_H_05_AH	57
	LIP0008258	54
	LIP0034000	54
	M002_A_08_AT	52
	LIP0031324	51
	LIP0020168	50
	LIP0008394	46

Predecessor Objects

Material Master - Basic View (2019) → Material - Class Type 001.

Additional Information

Multi-language Requirement

Multi language is supported for Materials - Class Type 001. Login via a different language will show the description displayed in the logon language if the language key is maintained.

The following languages are allowed:

Core languages: EN - English, FR - French, IT - Italian and ZH - Mandarin.
Additional languages: PT - Portuguese, DE - German and ES - Spanish.

Document Management

Not Applicable

Legal Requirement

Not Applicable

Special Requirements

Not Applicable

Target Design

The technical design of the target for this conversion approach.

Table	Field	Field Description	Data Type	Length	Requirement
KLAH	CLINT	Internal Class Number	NUMC	10	Required
KLAH	KLART	Class Type	CHAR	3	Required
KLAH	CLASS	Class	CHAR	18	Required
KLAH	STATU	Status	CHAR	1	System
KLAH	LOCLA	Local class	CHAR	1	Conditional
KLAH	VONDT	Valid from	DATS	8	System
KLAH	BISDT	Valid to	DATS	8	System
KLAH	PRAUS	Same classification	CHAR	1	System
KLAH	ANAME	Created By	CHAR	12	System
KLAH	ADATU	Created On	DATS	8	System
KLAH	ANZUO	No of Assignments	CHAR	1	System
SWOR	CLINT	Internal Class Number	NUMC	10	Required
SWOR	SPRAS	Language Key	LANG	1	Required
SWOR	KLPOS	Item Number	NUMC	2	Required
SWOR	KSCHL	Class Description	CHAR	40	Required
SWOR	KSCHG	Keyword (Upper Case for Matchcode)	CHAR	40	Required

Data Cleansing

ID	Criticality	Error Message/Report Description	Rule	Output	Source System	Syniti Report Required
1	Medium	No Class Description in Allowed Languages	The following language are allowed as being either core, or additional: DE, EN, ES, FR, IT, PT, ZH.	KLAH-KLART and KLAH-CLASS	PF2 & WP2	YES

Conversion Process

The high-level process is represented by the diagram below:

Field Governance Rules
These governance rules apply to the individual fields within the data record.
Rule #	Field Label	Rule Description	Validation Method	Conditional Logic	Cleansing Rule (Also see Data Cleansing section above)
1	KLAH-KLART	Only records with CLASS TYPE 001 are being migrated.	Upfront Automated	KLART = '001'
2	KLAH-CLINT	Only records where the material is relevant.	Upfront Automated	KLAH-CLINT = KSSK-CLINT and KSSK-OBJEC = MARA-MATRN
3	SWOR-SPRAS	The following language are allowed: DE, EN, ES, FR, IT, PT, ZH..	Upfront Automated		No Class Description in Allowed Languages

Data Privacy and Sensitivity

Not Applicable

Extraction

Class data for CLASS TYPE 001 that are linked to Material records that have been identified as part of Basic Data will be extracted. No data for Service Master records that will become Materials in the target will be extracted.

Extraction Run Sheet

Req #	Requirement Description	Team Responsible
1	Extract data from source system based on relevancy rules	Syniti

Selection Screen

Selection Ref Screen	Parameter Name	Selection Type	Requirement	Value to be entered/set
Not Applicable

Data Collection Template (DCT)

Not Applicable

Extraction Dependencies

Item #	Step Description	Team Responsible
1	Materials in scope to be loaded as Material Master Basic Data must be identified before the extraction of Class data, so that we can limit the extraction to this sub-set of data.	Cutover

Transformation

The Target fields are mapped to the applicable Legacy field that will be its source, this is a 3-way activity involving the Business, Functional team and Data team. This identifies the transformation activity required to allow Syniti Migrate to make the data Target ready:

Perform value mapping and data transformation rules.
1. Legacy values are mapped to the to-be values (this could include a default value)
2. Values are transformed according to the rules defined in
Prepare target-ready data in the structure and format that is required for loading via prescribed Load Tool. This step also produces the load data ready for business to perform Pre-load Data Validation

Transformation Run Sheet

Item #	Step Description	Team Responsible
1	Verify that data is extracted from both source systems.	Syniti / S2P Data Team
2	Transformation jobs are ready for execution.	Syniti
3	Review and Validate Error and Preload Reports	Syniti
4	Generate Load Files	Syniti

Transformation Rules

Rule #	Source system	Source Table	Source Field	Source Description	Target System	Target Table	Target Field	Target Description	Transformation Logic
1	PF2 & WP2	KLAH	CLINT	Internal Class Number	S4H	KLAH	CLINT	Internal Class Number	System generated
2	PF2 & WP2	KLAH	KLART	Class Type	S4H	KLAH	KLART	Class Type	Copy As-Is (will always be '001')
3	PF2 & WP2	KLAH	CLASS	Class	S4H	KLAH	CLASS	Class	Copy As-Is
4	PF2 & WP2	KLAH	STATU	Status	S4H	KLAH	STATU	Status	Copy As-Is
5	PF2 & WP2	KLAH	LOCLA	Local class	S4H	KLAH	LOCLA	Local class	Copy As-Is
6	PF2 & WP2	KLAH	VONDT	Valid from	S4H	KLAH	VONDT	Valid from	Copy As-Is
7	PF2 & WP2	KLAH	BISDT	Valid to	S4H	KLAH	BISDT	Valid to	Copy As-Is
8	PF2 & WP2	KLAH	PRAUS	Same classification	S4H	KLAH	PRAUS	Same classification	Copy As-Is
9	PF2 & WP2	KLAH	ANAME	Created By	S4H	KLAH	ANAME	Created By	System generated
10	PF2 & WP2	KLAH	ADATU	Created On	S4H	KLAH	ADATU	Created On	System generated
11	PF2 & WP2	KLAH	ANZUO	No of Assignments	S4H	KLAH	ANZUO	No of Assignments	System generated
12	PF2 & WP2	SWOR	CLINT	Internal Class Number	S4H	SWOR	CLINT	Internal Class Number	Map from legacy KLAH-CLINT to KLAH-CLINT generated in Rule 1
13	PF2 & WP2	SWOR	SPRAS	Language Key	S4H	SWOR	SPRAS	Language Key	Copy As-Is
14	PF2 & WP2	SWOR	KLPOS	Item Number	S4H	SWOR	KLPOS	Item Number	Copy As-Is
15	PF2 & WP2	SWOR	KSCHL	Class Description	S4H	SWOR	KSCHL	Class Description	Copy As-Is
16	PF2 & WP2	SWOR	KSCHG	Keyword (Upper Case for Matchcode)	S4H	SWOR	KSCHG	Keyword (Upper Case for Matchcode)	Copy As-Is

Joining Material to Class

KSSK-OBJEK = MARA-MATNR.
KLAH-CLINT = KSSK-CLINT & KLAH-KLART = '001'.

The following image shows the various joins for characteristics:

Transformation Mapping

Mapping Table Name	Mapping Table Description	Link
Material	XREF	MM Config Values - Material Master
CLINT	XREF	MM Config Values - Classes for 001

Transformation Dependencies

List the steps that need to occur before transformation can commence

Item #	Step Description	Team Responsible
1	Data has been extracted from sources systems	Syniti
2	Deduplication is completed	Syniti & S2P Data Team
3	Configuration should be completed - (Config documents should be complete)	Syniti & S2P Data Team
4	Value mapping and XREF tables are ready	Syniti & S2P Data Team

Pre-Load Validation

Project Team

Completeness

Task	Action
Verify Record Count	The number of records presented after relevancy checks and validation needs to be correct compared to the staged data in Migrate.
Completeness check	All fields required as per mapping template rules must be completed. Validity reports checking each field in Syniti must be built.

Accuracy

Task	Action
Conversion Accuracy	Data team to verify that the data staged in the preload tables are correct in terms of the mapping rules. This will be done via Syniti DSP reports.

Business

Completeness

Task	Action
Count and Completeness check	All fields required as per mapping template rules must be completed. Validity reports checking each field in ADMM must be built to help check.

Accuracy

Task	Action
Conversion Accuracy	Business team to verify that the data staged in the preload tables are correct in terms of the mapping rules. This will be done via Syniti ADMM reports/SAP reports

Load

The load process includes:

Execute the automated data load into target system using the appropriate load tool.
Once the data is loaded to the target system, it will be extracted and prepared for Post Load Data Validation.

Load Run Sheet

Item #	Step Description	Team Responsible
1	Verify data extracted	Data Specialist/Functional - S2P
2	Verify data combined from both source systems	Data Specialist/Functional - S2P
3	Verify Material XREF is ready (based on load of 2019 Material Master - Basic View)	Data Specialist/Functional - S2P
4	Stage data for transformations	Syniti
5	Run transforms	Syniti
8	Execute pre-load report	Syniti
9	Validate preload report - release	Data Specialist/Functional - S2P
10	Prepare and simulate	Syniti
11	Pre-load verification and approval to load	Functional/Data Owner - S2P
12	Load to S4	Syniti
13	Complete Jira steps, Volumes and Timings	All - where applicable
14	Execute post-load report	Syniti
15	Post-load report verification/validation	Data Specialist/Functional/Data Owner - S2P
16	Object load completion approval	Data Owner - S2P

Load Phase and Dependencies

Configuration

Item #	Configuration Item
	Not Applicable

Conversion Objects

Object #	Preceding Object Conversion Approach
1	Material Master - Basic View (2019)

Error Handling

Error Type	Error Description	Action Taken
Data	Classes not linked to a Target Material	Fix incorrect data
Data	Incorrect Language	Fix incorrect data
Data	Duplicates	Fix incorrect data
Load	Authorization errors	Apply for the applicable authorization permission and retry
Load	Technical load failures - If using MC - Simulation errors, etc	Investigate error and rectify. Retry simulation and/or load

Post-Load Validation

Project Team

Post-Load Steps

Step Description	Team Responsible
Execute post-load report	Syniti
Post-load report verification/validation	Data Specialist/Functional/Data Owner - S2P
Object load completion approval	Data Owner - S2P

Completeness

Task	Action
Verify count	The number of records presented in the post-load needs to be compared to the preload – Syniti report
Field by field check	Compare source data to target data.

Accuracy

Task	Action
Verify Logs	Check if there is data that failed to load and perform the necessary actions (e.g. register as post load issue or attempt to load the record again, etc.).

Business

Completeness

Task	Action
Verify Count	The number of records presented in the preload needs to be compared to the post-load Syniti report.
Missing data	Check missing data which was supposed to be loaded.
Reconciliation	Participate in Post-load walkthroughs.

Accuracy

Task	Action
Conversion Accuracy	Business team to verify that the data staged in the preload tables are correct in terms of the mapping rules. This will be done via Syniti/SAP reports.

Key Assumptions

Master Data Standard is up to date as on the date of documenting this conversion approach and data load.
Materials - Class Type 001 is in scope based on data design and any exception requested by business.

Change log

Version	Published	Changed By	Comment
CURRENT (v. 20)	Dec 01, 2025 17:36	CLARKE-ext, Steve
v. 46	Dec 01, 2025 16:35	CLARKE-ext, Steve
v. 45	Dec 01, 2025 16:15	CLARKE-ext, Steve
v. 44	Dec 01, 2025 16:01	CLARKE-ext, Steve
v. 43	Dec 01, 2025 15:53	CLARKE-ext, Steve
v. 42	Dec 01, 2025 15:51	CLARKE-ext, Steve	Added DCT and Transform Rules for KSML
v. 41	Nov 17, 2025 10:32	CLARKE-ext, Steve
v. 40	Nov 17, 2025 10:11	CLARKE-ext, Steve
v. 39	Nov 13, 2025 13:59	CLARKE-ext, Steve
v. 38	Oct 28, 2025 15:35	CLARKE-ext, Steve

Go to Page History

Workflow history

Title	Last Updated By	Updated	Status
There are no pages at the moment.

Dec 03, 2025	Actor	Type	Activity	Version
Approved	JAIN-ext, Gaurav	State	changed state to Approved at 8:15 am	v47
Edited following Approval	JAIN-ext, Gaurav	State	gave Minor change approval at 8:15 am
Dec 01, 2025
	CLARKE-ext, Steve	Comment	commented 5:45 pm There is no link. I asked Simran about this for 2018. She responded: there is no config document for this as this is master data
		Comment	commented 5:42 pm We are not using any mappings
		Comment	commented 5:41 pm This is if there are no descriptions in the 7 allowed languages.
		Edit	updated the page at 5:36 pm
		Comment	commented 5:29 pm This is already documented above in Multi-language Requirement. I will update it to indicate that it is now mandatory that a description is required for each core and additional language. I have updated the Transformation Rules for the Descriptions to include: "There must be a description for each of the Core and Additional languages. If a language is missing take if from English." Syniti are aware that SPRAS is a key.
	MADHOK-ext, Jasleen	Comment	commented 4:50 pm CLARKE-ext, Steve Configuration table link is required.
		Comment	commented 4:49 pm CLARKE-ext, Steve What Transformation tables are required?
		Comment	commented 4:44 pm CLARKE-ext, Steve what is this rule?
		Comment	commented 4:44 pm CLARKE-ext, Steve Please add Class must have 1 Description for each language, which also serves as the primary keyword. The required languages are English, French, Italian, Mandarin, Brazilian Portuguese, German and Spanish.
	CLARKE-ext, Steve	Edit	updated the page at 3:51 pm

Workflow history

Space shortcuts

Page tree

CNV-2017 Materials - Class Type 001

Purpose

Conversion Scope

Profiling

Predecessor Objects

Additional Information

Multi-language Requirement

Document Management

Legal Requirement

Special Requirements

Target Design

Data Cleansing

Conversion Process

Data Privacy and Sensitivity

Extraction

Extraction Run Sheet

Selection Screen

Data Collection Template (DCT)

Extraction Dependencies

Transformation

Transformation Run Sheet

Joining Material to Class

Transformation Mapping

Transformation Dependencies

Pre-Load Validation

Project Team

Completeness

Accuracy

Business

Completeness

Accuracy

Load

Load Run Sheet

Configuration

Conversion Objects

Error Handling

Post-Load Validation

Project Team

Post-Load Steps

Completeness

Accuracy

Business

Completeness

Accuracy

Key Assumptions

See also

Change log

Workflow history