You are using this macro out of its context (not in glossary page) or there is an issue related to needed information to load macro. Please contact our support team via LINK: https://support.covectors.io to provide you with the needed assistance concerning this problem.
Linearity
Created Jun 24, 2019 (14:23)
by Vidhyadharan-ext, Vaishna , last modified Aug 18, 2023 (13:16)
by GUENNOUNI, Nathalie
Definition
ISO 5725: La linéarité est la capacité d'une méthode d'analyse, à l'interieur d'un intervalle, à fournir une réponse proportionnelle à la quantité en analyte à doser dans l'échantillon pour le laboratoire.
Linearity
Created Jun 24, 2019 (14:23)
by Vidhyadharan-ext, Vaishna , last modified Aug 18, 2023 (13:16)
by GUENNOUNI, Nathalie
Definition
ICH: It is the ability (within a given range) to obtain test results which are directly proportional to the concentration (amount) of analyte in the sample.
MSA: The correlation multiple and independent bias errors over the operating range. A system error component of the measurement system. The difference of bias throughout the espected operating (measurement) range of the equipment.
Lower Control Limit
Created Jun 14, 2019 (05:52)
by Vidhyadharan-ext, Vaishna
Definition
6 sigma: The Lower Control Limit (LCL) is a limit in the Control Chart that is set below the centerline, typically at -3 standard deviations, in order to determine whether or not the process is in control.
Lower Specification Limit
Created Jun 14, 2019 (05:53)
by Vidhyadharan-ext, Vaishna
Definition
6 sigma: A Lower Specification Limit (LSL) is the lower limit of a tolerance range specified by a customer requirement. A measured value that is below this limit is considered a defect
This page has no comments.