Insert an image/video among an Editorial content

Overview

To be continued...

Pre-requisite

Before to proceed, we assume that your concerned image/video is published in keepeek (1. Import, 2. Index and 3. Classify).

Step-by-step

Step 1: Place your cursor
1. If needed, activate SDL Tridion.
2. Click into your Editorial rich text to get the cursor where you need to insert the media.
Step 2: Browse and insert the media
1. Reach the "Insert" toolbar tab, then press the "Image" button.
2. Browse Keepeek to the folder where is your media stored, select it then press the "Insert" button. Don't find your media? See Why can I not find the image/video I need, in spite of I identified it on Keepeek side?
Step 3: Adjust the dimension
Adjust the dimension of an ever added media To access this "Insert image" window from an ever added media, you must select it (click beside, then highlight it), then press again "Insert" > "Image", as if you wanted to insert a new media. Only the media have to be selected (nor space, nor any other character). 1. The default width and height are 224 pixels maximum. You certainly need to enlarge it. To proceed, click the "Advanced" button.
2. Adjust the Width and/or Height, then press OK Preserve the proportion Before changing any value here, ensure the "Proportion" option is ticked. Which width? We recommend to use a 400px width for videos. Do not try to "fit" all of the available place: the Solvay ONE design is responsive, the available width is different on every contexts (monitors resolutions, mobiles, etc.). In addition, the video player can be full screened at your visitors demand. Lots of pixels? The media is be degraded in Edit mode, but if the media in Keepeek have a sufficient dimension (not lower than the one you choosed in Solvay ONE side), continue this process, you will see that the staging (and Live) is then asking Keepeek to provide a better quality image.
Step 3: Finish editing
1. Press "FInish Editing" to save the change and republish it in Staging.
2. Some seconds later, press "Dashboard", then "Exit" to check the result in Staging.